Panasonic DMCFH3P, DMCFH3S, DMCFH3R Select on Connection, PictBridgePTP, USB Mode, Version Disp

Preparation

x[USB MODE]

Select the USB communication system after or before connecting the camera to your PC or your printer with the USB connection cable (supplied).

y[SELECT ON CONNECTION]:

Select either [PC] or [PictBridge(PTP)] if you connected the camera to a PC or a printer supporting PictBridge.

{[PictBridge(PTP)]:

Set after or before connecting to a printer supporting PictBridge.

z[PC]:

Set after or before connecting to a PC.

•When [PC] is selected, the camera is connected via the “USB Mass Storage” communication system.

•When [PictBridge(PTP)] is selected, the camera is connected via the “PTP (Picture Transfer Protocol)” communication system.

[VIDEO OUT]¢

Set to match the color television system in each country. (Playback Mode only)

[NTSC]: Video output is set to NTSC system.

[PAL]: Video output is set to PAL system.

• This will work when the AV cable is connected.

¢PAL video out is not available on the version DMC-FH20P/DMC-FH3P/DMC-FH1P sold in the U.S. and the version DMC-FH20PC/DMC-FH3PC/DMC-FH1PC sold in Canada.

[TV ASPECT]

Set to match the type of TV. (Playback Mode only)

[W]: When connecting to a 16:9 screen TV.

[X]: When connecting to a 4:3 screen TV.

• This will work when the AV cable is connected.

[VERSION DISP.]

It is possible to check which version of firmware is on the camera.

- 27 -