Panasonic DMCFP3S, DMCFH3S, DMCFH3R, DMCFP3AB, DMCFP3R, DMCFH3K, DMCFH1S Flash setting is fixed to Œ

Advanced (Recording pictures)

Note

•The flash setting is fixed to [Œ].

•Use a card with SD Speed Class¢ with “Class 6” or higher when recording motion pictures. ¢ SD speed class is the speed standard regarding continuous writing.

•Refer to P142 for information about the available recording time.

•The available recording time displayed on the screen may not decrease regularly.

•Depending on the type of the card, the card access indication may appear for a while after recording motion pictures. This is not a malfunction.

•When motion pictures recorded with the camera are played back on other equipment, the quality of the picture and sound may deteriorate and it may not be possible to play them back. Also the recording information may not be displayed correctly.

•Sound from motion pictures recorded by this camera cannot be played back by older models of Panasonic digital cameras (LUMIX) launched before July 2008.

•In Motion Picture Mode, the following functions cannot be used.

– [š] and [Ø] in [AF MODE]

– Direction detection function

– [OFF], [AUTO] and [MODE2] on the Optical Image Stabilizer function

•[DIGITAL ZOOM] and [AF ASSIST LAMP] cannot be set in Motion Picture Mode. Setting of other recording mode will be reflected.

•We recommend you use a battery with sufficient battery power or the AC adaptor when recording motion pictures.

•If while recording motion pictures using the AC adaptor and the power supply is cut off due to a power outage or if the AC adaptor is disconnected etc., the motion picture being recorded will not be recorded.

•Sound of operation may be recorded when button or other operations are performed during motion picture recording.

- 72 -