Panasonic DMCFP3AB, DMCFH3S, DMCFH3R BABY1/BABY2, Press MENU/SET to finish To cancel AGE and Name

Advanced (Recording pictures)

[BABY1]/[BABY2]

This takes pictures of a baby with a healthy complexion. When you use the flash, the light from it is weaker than usual.

It is possible to set different birthdays and names for [BABY1] and [BABY2]. You can select to have these appear at the time of playback, or have them stamped on the recorded image using [TEXT STAMP] (P97).

∫Birthday/Name setting

1Press 3/4 to select [AGE] or [NAME] and then press 1.

2Press 3/4 to select [SET] and then press [MENU/SET].

3Enter the birthday or name. Birthday:

2/1: Select the items (year/month/day).

3/4: Set.

[MENU/SET]: Exit.

Name: For details on how to enter characters, refer to “Entering Text” on P89.

•When the birthday or name is set, [AGE] or [NAME] is automatically set to [ON].

•If [ON] is selected when the birthday or name has not been registered, the setting screen appears automatically.

4Press [MENU/SET] to finish.

∫To cancel [AGE] and [NAME]

Select the [OFF] setting in step 2 of the “Birthday/Name setting” procedure.

Note

•The age and name can be printed out using the “PHOTOfunSTUDIO” bundled software on the CD-ROM (supplied).

•If [AGE] or [NAME] is set to [OFF] even when the birthday or name has been set, the age or name will not be displayed. Before taking pictures, set [AGE] or [NAME] to [ON].

•The focus range is 5 cm (0.17 feet) (Wide)/1 m (3.28 feet) (Tele) to ¶.

•When the camera is set to [STABILIZER] and there is very little jitter, or if [STABILIZER] is set to [OFF], shutter speed may slow down up to 1 second.

•[ ] in [SENSITIVITY] is activated, and maximum ISO sensitivity level becomes [ISO1600].

•If the camera is turned on with [BABY1]/[BABY2] set, the age and name are displayed at the lower left of the screen for about 5 seconds, along with the current date and time.

•If the age is not properly displayed, check the clock and birthday settings.

•The birthday setting and name setting can be reset with [RESET].

•The initial setting for [AF MODE] is [š].

- 63 -