Panasonic DMCFH3P, DMCFH3S, DMCFH3R, DMCFP3S, DMCFP3AB, DMCFP3R, DMCFH3K, DMCFH1S, DMCFH1K 107, Copy

Advanced (Playback)

[COPY]

You can copy the data of the pictures you have taken from the built-in memory to a card or from a card to the built-in memory.

Select [COPY] on the [PLAYBACK] Mode menu. (P21)

Press 3/4 to select the copy destination and then press [MENU/SET].

: All the picture data in the built-in memory are copied onto the card at one time. > step 4.

: One picture at a time is copied from the card to the built-in memory. > step 3.

Press 2/1 to select the picture and then press [MENU/SET].

Press 3 to select [YES], and then press [MENU/

SET].

•If you press [MENU/SET] while copying pictures, the copying will stop halfway.

•Do not turn the camera off at any point during the copying process.

Press [‚] to return to the menu screen.

•Press [MENU/SET] to close the menu.

•If you copy from the built-in memory to a card, all the pictures are copied and then the screen automatically returns to the playback screen.

Note

•If you copy picture data from the built-in memory to a card which does not have sufficient free space, the picture data will only be copied halfway. We recommend using a card which has more free space than the built-in memory (about 40 MB).

•If a picture exists with the same name (folder number/file number) as the picture to be copied in

the copy destination when [ ] is selected, a new folder is created and the picture is copied. If a picture exists with the same name (folder number/file number) as the picture to be copied in

the copy destination when [ ] is selected, that picture is not copied. (P129)

•It may take time to copy the picture data.

•Only pictures recorded with a Panasonic digital camera (LUMIX) will be copied.

(Even if the pictures were recorded with a Panasonic digital camera, you may not be able to copy them if they were edited with a PC.)

•[PRINT SET] or [PROTECT] settings will not be copied. Perform the settings again after copying is finished.

- 107 -