Panasonic DMCFP3S, DMCFH3S, DMCFH3R, DMCFP3AB 112, Selecting a single picture and printing it

Connecting to other equipment

Note

•This unit cannot stand upright when the AC adaptor is connected. When operating it on a flat surface, we recommend placing it on a soft cloth.

•Do not use any other USB connection cables except the supplied one.

Use of cables other than the supplied USB connection cable may cause malfunction.

•Turn the camera off before connecting or disconnecting the AC adaptor (optional).

•Before inserting or removing a card, turn the camera off, and disconnect the USB connection cable.

•You cannot switch between the built-in memory and the card while the camera is connected to the printer. Disconnect the USB connection cable, insert (or remove) the card and then connect the USB connection cable to the printer again.

Selecting a single picture and printing it

Press 2/1 to select the picture and then press [MENU/SET].

• The message disappears in about 2 seconds.

Press 3 to select [PRINT START] and then press [MENU/SET].

•Refer to “Print Settings” (P114) for the items which can be set before starting to print the pictures.

•Press [MENU/SET] to cancel printing halfway.

•Disconnect the USB connection cable after printing.

PictBridge	12
	100-0001
PLEASE SELECT
THE PICTURE TO PRINT
MULTI PRINT	PRINT
SELECT

SINGLE SELECT
PRINT START
PRINT WITH DATE		OFF
NUM. OF PRINTS		1
PAPER SIZE
PAGE LAYOUT
CANCEL	SELECT	SET

- 112 -