Others
- 130 -
[MOTION RECORDING WAS CANCELLED DUE TO THE LIMITATION OF THE
WRITING SPEED OF THE CARD]
•Use a card with SD Speed Class¢ with “Class 6” or higher when recording motion pictures.
¢SD speed class is the speed standard regarding continuous writing.
•In the event that it stops even after using a “Class 6” card or higher, the data writing speed has
deteriorated so it is recommended to make a backup and then format (P28).
•Depending on the type of the card, motion picture recording may stop in the middle.
[A FOLDER CANNOT BE CREATED]
•A folder cannot be created because there are no remaining folder numbers that can be used.
(P110)
>Format the card after saving necessary data on a PC etc. (P28)
[PICTURE IS DISPLAYED FOR 4:3 TV]/[PICTURE IS DISPLAYED FOR 16:9 TV]
•The AV cable is connected to the camera.
>Press [MENU/SET] if you want to delete this message at once.
>Select [TVASPECT] in the [SETUP] menu if you want to change the TV aspect. (P27)
•This message also appears when the USB connection cable is connected to the camera only.
In this case, connect the other end of the USB connection cable to a PC or a printer. (P108,
111)
[PRINTER BUSY]/[PLEASE CHECK THE PRINTER]
•The printer cannot print.
>Check the printer.
[NO BATTERY POWER REMAINS]
•The remaining battery power is low.
>Charge the battery.
[THIS BATTERY CANNOT BE USED]
•The battery cannot be recognized by the camera.
>Use a genuine Panasonic battery. If this message is display ed even when a genuine
Panasonic battery is used, contact the dealer or your nearest Service Center.
•The battery cannot be recognized as its terminal is dirty.
>Remove any dirt etc. from the terminal.