Others
The brightness or the hue of the recorded picture is different from the actual scene.
•When recording under fluorescent or LED lighting fixture, etc., increasing the shutter speed may introduce slight changes to brightness and color. These are a result of the characteristics of the light source and do not indicate a malfunction.
•When recording subjects in extremely bright locations or recording under fluorescent lighting, LED lighting fixture, mercury lamp, sodium lighting, etc., the colors and screen brightness may change or horizontal striping may appear on the screen.
Recording motion pictures is not possible.
•You may not be able to record for a short while after turning this unit on when using a large capacity card.
The screen may be blacked out momentarily, or the unit may record noise.
•The screen may be blacked out momentarily, or the unit may record noise due to static electricity or electromagnetic waves etc. depending on the environment of the motion picture recording.
The flash is not activated.
•Is the flash closed?
>Open the flash.
•When the electronic shutter is used, the flash is not activated.
>Set [Shutter Type] to [AUTO] or [EFC].
•When [Silent Mode] is set to [ON], the flash is not activated.
>Set [Silent Mode] to [OFF].
The picture is not played back.
There are no recorded pictures.
•Is the card inserted?
•Is there a picture on the card?
•Is this a folder or picture which was processed in the PC? If it is, it cannot be played back by this unit.
>It is recommended to use the “PHOTOfunSTUDIO” software in the
•Has [Playback Mode] been set for playback?
>Change to [Normal Play].
The folder number and the file number are displayed as
•Is this a
•Did you remove the battery immediately after
> To delete such pictures, make a backup of the data and format the card.
(ENG) VQT5D49 41
