Others
Transmission of the image fails midway. Some images cannot be transmitted.
•Image cannot be transmitted when the battery indicator is flashing red.
•Is the size of the image too large?
>Reduce the image size at [Size], and then send.
>Transmit after dividing the motion picture with [Video Divide].
•File format of the motion picture that can be sent differs depending on the destination.
•Capacity or number of images in the web service is full.
>Login to “LUMIX CLUB”, and check the status of the destination on the web service link settings.
The motion pictures cannot be played back on a TV.
•Are you trying to play back the motion pictures by directly inserting the card in the card slot of the TV?
>Connect the camera to the TV with the AV cable (optional), or with the HDMI micro cable, and then play back the motion pictures on the camera.
VIERA Link does not work.
•Is it connected properly with the HDMI micro cable?
•Is the [VIERA Link] on this unit set to [ON]?
>If the input channel does not switch automatically, use the remote control for the TV to switch it.
>Check the VIERA Link setting on the connected device.
>Turn this unit off and on.
>Set [HDAVI Control] to [Off] on the TV and then turn it back to [On]. (Refer to the operating instructions of the TV for details.)
The shutter remains closed when the camera is turned off (including Sleep Mode).
•If the camera is shaken, it may cause the shutter to close. This is not a malfunction. Do not put your finger in the mount. Turning on the camera will
There is a sound from lens unit.
•It is a sound of lens movement or aperture operation when this unit is turned on or off, and it is not a malfunction.
•The sound, which is caused by the automatic adjustment of the aperture, is heard when the brightness has changed due to, for example, zooming or the movement of the camera. This is not a malfunction.
The camera becomes warm.
•The surface of the camera may become warm during use. This does not affect the performance or quality of the camera.
The clock is reset.
•If you do not use the camera for a long time, the clock may be reset.
> [Please set the clock] message will be displayed; please reset the clock. (P17)
(ENG) VQT5D49 43
