7
RQT8997
POWER button (
(
¦/I POWER)(➡12)
Press to switch the unit from on to standby mode or vice versa. In
standby mode, the unit is still consuming a small amount of
power.
Disc tray (➡12)
Display
IIlumination lamp
Lights when the unit is turned on.
Open/close disc tray (➡12)
.Search / Skip
Search: Press and hold
Skip: Press
Stop (➡12)
Pause (➡12)
Start play (➡12)
Rear panel terminals (➡8–10)
Batteries
Insert so the poles (K and L) match those in the remote control.
When closing the lid, insert it from the L (minus) side.
pDo not use rechargeable type batteries.
pDo not mix old and new batteries.
pDo not use different types at the same time.
pDo not heat or expose to flame.
pDo not take apart or short circuit.
pDo not attempt to recharge alkaline or manganese batteries.
pDo not use batteries if the covering has been peeled off.
Mishandling of batteries can cause electrolyte leakage which can
damage items the fluid contacts and may cause a fire.
Remove batteries if the remote control is not going to be used for a
long period of time. Store in a cool, dark place.
Use
If you cannot operate the unit or television using the remote control
after changing the batteries, please re-enter the codes (➡11).
Main unit
OPEN/CLOSE
POWER
.
POWER
OPEN/CLOSE
Using remote control
R6/LR6, AA
30
20
30
20
Remote control signal sensor
7m (23 feet) directly in
front of the unit
Getting started Control reference guide
Getting started