Panasonic DMP-BD50 TV screen and video ( continued) Page, Sound, HDMI connections

32
RQT9184
(ENG)
TV screen and video ( continued) Page
Sound
HDMI connections
The 4:3 aspect ratio picture
expands left and right.
Screen size is wrong.
≥Use the television to change the aspect. Refer to your televis ion’s operating instructions.
≥When using a component video cable, set “Progressive” to “Video”. If the situation is not
restored after that, set “T V Aspect” to “4:3 Pan & Scan”.
—
25, 28
There is a lot of after-image
when playing video.
≥Turn “3D NR” or “Integrated NR” off if it is on. 25
There is no apparent change in
picture quality when adj usted
with the “Video” menu in the
on-screen menu.
≥The effect is less perceivable with some types of video. —
The masked-off area is mas ked
in gray.
≥If the “Screen Saver Function” in the Setup menu is set to “Off”, the masked-off area is
displayed in black.
27
No sound.
Low volume.
Distorted sound.
Cannot hear the desired au dio
type.
≥Check the connections and the “Digital Audio Output” settings. Check the input mode on the
amplifier/receiver if you have connected one.
≥Press [AUDIO] to select the a udio.
≥Turn off “V. Surround” in the following cases.
–When using discs that do not have surro und sound effects such as Karaoke discs.
–When playing bilingual broadcast programs.
≥Match the speaker settings with the connected equipment. Change multi channel speaker
settings by selecting “Multi Channel” in “Speaker”.
≥The sound effects (Re-master, V. Surround, etc.) will not work when the bitstream signal is
output from the HDMI AV OUT te rminal or the DIGITAL AUDIO OUT termi nal.
≥When “BD-Video Secondar y Audio” is set to “Off”, Dol by Digital Plus, Dolby TrueHD and
DTS-HD are output from the DIGITAL AUDIO OUT terminal as Dolby Digital or DTS Digital
Surround bitstream .
≥[DivX] Audio may not be output depending on how files were created.
6–7, 27
15
25
28
—
17, 27
—
Cannot switch audio. ≥There are discs for which audio cannot be changed because of how the disc was created.
≥When connecting an amplifier/receiver using a coaxial cable, optical digital audio cable or an
HDMI cable, you can not switch the audio i f “Digital Audio Outp ut” is set to “Bits tream”. Set
“Digital Audio Outp ut” to “PCM” or conn ect using audio cabl es.
—
7, 8, 27
The images from this unit d o
not appear on the televi sion.
Picture is distor ted.
Jittering occurs.
≥Press [∫] and [1](PLAY) simultaneously on the unit for more than 5seconds to shift to more
compatible mode with HDMI equipment. However, Dolby Digital Plus, Dolby TrueHD, and
DTS-HD audio are not outp ut in bitstream. To output the bitstrea m, select “Restore Default
Settings” to rest ore the factory pr esets and make proper settings.
≥To output video from a device connected with an HDMI cable, set “HDM I Video Mode” to “On ”
in the Setup menu.
≥Picture may not be s een when more than 4 devices are connec ted with HDMI cables.
Reduce the number of connected devices.
≥When “24p Output” is set to “On”, HDMI authentication takes place where 24p images switch
to other images, and a bl ack screen is displayed.
≥When “24p Output” is set to “On”, jittering may occu r while playing DVD-Video. In this case,
turn “24p Output” to “Off”.
29
28
—
28
28
The 4:3 aspect ratio picture
expands left and right.
Screen size is wrong.
≥Change “TV Aspect” type to “16:9”. 28
When playing DVD-Video using
progressive output, one part of
the picture momentarily
appears to be doubled up.
≥When you use the HDMI AV OUT terminal for video output, follow the steps below for setting.
1 Connect this unit to the TV with any cable except the HDMI cable.
2 When you connect wi th the Component V ideo cable, set “HDMI V ideo Mode” to “Off” a nd
“Component Video R esolution” to “480i” in the Setup menu.
28
No sound.
Low volume.
Distorted sound.
Cannot hear the desired au dio
type.
≥Audio may not be heard when more than 4 devices are connected with HDMI cables.
Reduce the number of connected devices.
≥The sound effects will not work when the bitstream s ignal is output from the HDM I AV OUT
terminal or the D IGITAL AUDIO OUT terminal.
≥To output audio from a device connecte d with an HDMI cable, set “HDMI Audio Output” to
“On” in the Setup m enu.
≥If the sound is distor ted when the unit is con nected to an amplifier/rec eiver with an HDMI
cable, adjust the settings in “Speaker” in the Setup menu to match the connection.
≥Depending on the con nected equipment, the sound may be distor ted if this unit is connec ted
with an HDMI cable.
≥When “BD-Video Secondary Audio” is set to “On”, Dolby Digital Plus, Dolby TrueHD, and
DTS-HD are converted to 48 kHz Dolby Digital and output. LPCM 7.1 channel audio is
converted to 5.1 channel a udio. In this case, set the “BD-Vi deo Secondary Audio” to “Off”.
—
—
28
28
—
27
DMP-BD50PP-RQT9184_eng.book 32 ページ ２００８年４月４日 金曜日 午後８時１４分