Card |
| Page |
The capacity of the SD card | ≥When a | 16 |
decreased. | data may be written to the SD card. Erase the data by using |
|
| the card or use a new card. |
|
| ≥Data that can be played from an SD card are AVCHD and JPEG data. | 5 |
music on an SD card cannot be |
|
|
played. |
|
|
|
|
|
The contents of the card | ≥The card is not compatible or the contents on the card may be damaged. | 5 |
cannot be read. | ≥Turn off and then turn on the unit again. | — |
Network |
|
|
|
|
|
I can’t connect to the network. | ≥Has the LAN cable come unplugged? Check that the LAN cable is properly connected. | 9 |
| ≥Have you plugged in a modular cable for use with a telephone into the LAN terminal on this | 9 |
| unit? Connect with a straight LAN cable. | — |
| ≥Is the power for the modem or broadband router turned on? Turn the power on for each | |
| device. | — |
| ≥Is there a mistake in the network settings? Follow any instructions you may have received | |
| from your ISP (Internet Service Provider) and make changes to the settings. | — |
| ≥Are the broadband router settings correct? Read the operating instructions for the broadband | |
| router. | — |
| ≥Is the broadband router and/or modem correctly connected? Check the operating | |
| instructions for each device and connect accordingly. | 26, 28 |
| ≥Check the “Network” and | |
While using my PC, I cannot | ≥Does your Internet Service Provider (ISP) or service contract prevent multiple terminals | — |
connect to the network. | connecting at the same time? Check the content of your contract. |
|
Other difficulties with playback |
| |
|
|
|
Audio and video momentarily | ≥This occurs between playlist chapters or scenes ([AVCHD]). | — |
pause. | ≥When playing a title recorded on both layers, the unit automatically switches between layers | — |
| and plays the title in the same way as a normal program. However, video and audio may |
|
| momentarily cut out when the unit is switching layers. |
|
| ≥Ensure the disc is for the correct | Cover |
played. | not defective. | 26 |
| ≥You have set a ratings level to limit | |
| ≥Some | — |
≥Confirm whether the disc supports | — | |
with |
|
|
The virtual package is not | ≥Confirm whether the disc supports the virtual package. | 16 |
played with | ≥The inserted SD card does not have sufficient available capacity. | — |
| ≥The SD card is | 5 |
| ≥Sub contents copied to an SD card are provided by the disc producer as a part of the | 16 |
|
| |
| as a virtual package. |
|
|
|
|
Alternative soundtrack and | ≥The languages are not recorded on the disc. | — |
subtitles cannot be selected. | ≥You may not be able to use the | 14 |
| some discs. Use the disc’s menus to make changes. |
|
No subtitles. | ≥Subtitles are not recorded on the disc. | — |
| ≥Turn the subtitles on. Set “Subtitle” on the | 24 |
| ≥When progressive output is on, closed captions cannot be displayed. | — |
|
|
|
The subtitles overlap closed | ≥Turn off the subtitles or turn off the closed caption setting on the TV. | 24 |
captions recorded on discs. |
|
|
Angle cannot be changed. | ≥Angles can only be changed during scenes where different angles are recorded. | — |
|
|
|
The resume play function does | ≥Memorized positions are canceled when | — |
not work. | – pressing [∫] several times. |
|
| – opening the disc tray. | — |
| ≥The resume play function may not work depending on the disc. | |
| — | |
When other Panasonic products respond to this remote control
Change the remote control code on the main unit and the remote control (the two must match) if you place other Panasonic products close
together.
1Press [SETUP].
2Press [3, 4] to select “Others” and press [OK].
3Press [3, 4] to select “Remote Control Code” and press [OK].
4Press [3, 4] to select the code (1, 2, or 3) and
press [OK].
5To change the code on the remote control
While pressing [OK], press and hold the numbered button ([1], [2] or [3]) for more than
5seconds. 6 Press [OK].
Remote Control Code
Set Code 1
Set Code 2
Set Code 3
Press [ ] and [OK] together for more than 5 seconds on
the remote.
When the following indicator
appears on the unit’s display and you are unable to operate the unit
NOTE
The unit’s remote control code
Press and hold [OK] and the indicated number button at the same time for more than 5 seconds.
Reference
RQT9184
(ENG)
33
