STEP 4 : Connecting to an AC power
AC power supply cord
(included)
To a household AC outlet
≥This unit consumes a small amount of AC power (“Quick Start”: “Off”, approx. 0.1 W) even when turned off. In the interest of power conservation, if you will not be using this unit for an extended period of time, it can be disconnected.
The unit should be installed near an accessible AC power outlet, with the power cord connected directly to it.
To completely disconnect power from the unit, unplug the power cord from the AC power outlet.
14
STEP 5 : Setting
Easy Setting
After connecting your new player for the 1st time and pressing the power button, a screen for the basic settings will appear.
Preparation
Turn on the television and select the appropriate video input on the television.
1 Press [Í POWER].
Setup screen appears.
If this unit is connected to a Panasonic TV (VIERA) supporting HDAVI Control 2 or later via an HDMI cable, then the setting information on the TV is acquired by this TV.
2 Follow the
After completing “Easy Setting”, you can perform “Network Easy Setting”.
≥You can perform this setup anytime by selecting “Easy Setting” in the Setup menu. (> 33)
≥Initial setting is set to “2ch (Downmix) + 5.1ch”, so you will need to select “7.1ch” if using the 7.1ch output.
Analog Audio Output
Set unit’s analog audio output.
Select only “7.1ch” to enjoy audio from a receiver through 7.1ch analog connections. Otherwise, select “2ch (Downmix) + 5.1ch.”
2ch (Downmix) + 5.1ch
7.1ch
OK
RETURN
VQT2J87(ENG)
