Panasonic DMP-BDT350 Recommended audio output setting, Press Setup Audio Set each item, Stereo*5

Recommended audio output setting

The settings of the audio output vary depending on the connected equipment. Refer to the table below and set each of the items.

Press [SETUP] > “Audio” > Set each item

For details of the each item, refer to page 31.

			Example of connected equipment
			Receiver with	Receiver without	Receiver via	Receiver
		TV via HDMI*1	HD audio*2	HD audio*2	COAXIAL or
Setup menu			decoder via	decoder via		via analog output*3
					OPTICAL
			HDMI	HDMI
	“Dolby D/Dolby
	D +/Dolby	“PCM”	“Bitstream”	“PCM”	“PCM”	No effect
“Digital	TrueHD”
Audio	“DTS/DTS-HD”	“PCM”	“Bitstream”	“PCM”	“PCM”	No effect
Output”	“BD-Video
	Secondary	“Off”	“Off”	“Off”	“Off”	“Off”
	Audio”
“PCM Down Conversion”		No effect	No effect	No effect	“Off”*4	No effect
“Downmix”		“Stereo”	No effect	No effect	“Stereo”*5	No effect
“High Clarity Sound”		“Enable”	“Disable”*6	“Disable”*6	“Disable”*6	“Disable”*6

≥Because underlined items are the factory presets, it is not necessary to change these settings.

*1 If connected to TV via the COAXIAL, OPTICAL or AUDIO OUT terminal, these settings have no effect.

*2 HD audio: Dolby Digital Plus, Dolby TrueHD, DTS-HD High Resolution Audio and DTS-HD Master Audio

*3 Set “Analog Audio Output” to “7.1ch” or “2ch (Downmix) + 5.1ch”. (Press [SETUP] > TV / Device Connection) *4 If the connected equipment that does not support 96 kHz, set to “On”.

*5 If the connected equipment that supports the virtual surround function, set to “Surround encoded”.

*6 When connected to TV via the HDMI terminal for outputting image, set to “Enable”.

Reference

39

VQT2J87 (ENG)