Panasonic DMR-ES30V Set up to match your TV and remote control, ∫ TV operation, step, Press ENTER

Getting started

STEP 4 Set up to match your TV and remote control

started

Preparation

≥Press [DVD].

∫When other Panasonic products respond to this remote control

Change the remote control code on the main unit and on the remote control (the two must match) if you place other Panasonic products close together. When changing the remote control code, make sure the two codes are same.

Use “1”, the factory set code, under normal circumstances.

∫TV operation

To turn the TV on/off, change the TV input mode, select the TV channel and change the TV volume by means of this remote control, set the remote control as follows.

Point the remote control at the TV

While pressing [Í POWER TV], enter the code using the numeric buttons.

e.g., 01: press [0] > [1].

Manufacturer and Code No.

Getting

[1]While stopped

Press [FUNCTIONS].

[2]Select “Other Functions” with [3, 4] and press [ENTER].

[3]Select “SETUP” with [3, 4] and press [ENTER].

FUNCTIONS DVD	Cartridge Protection Off
DVD-RAM	Disc Protection Off

Playback	DIRECT NAVIGATOR	PLAYLISTS
		FLEXIBLE RECORDING
Schedule	SCHEDULE	SETUP
123	VCR Plus+	DISC MANAGEMENT
Dubbing	DUBBING
ENTER	Other Functions	Return

Panasonic		PHILIPS (RC-5)	03
National	01, 02	RCA	05
QUASAR
		SAMSUNG	14, 18, 19
FISHER	10	SANYO	10
GE	05	SHARP	06, 07
GOLDSTAR	15, 16, 17	SONY	08
HITACHI	12	SYLVANIA	03
JVC	11	THOMSON	05

[4]Select “Setup” with [3, 4] and press [2, 1].

[5]Select “Remote Control Code” with [3, 4] and press [ENTER].

[6]Use [3, 4] to select the code (1, 2 or 3) and

press [ENTER].

≥The code on the unit has been set.

[7]While pressing [ENTER], press and hold for about 2 seconds the numeric button ([1], [2] or [3]) corresponding to the code you selected in

step 6.

≥The code on the remote control has been set.

[8]Press [ENTER].

∫When the following indicator appears on the unit’s display

LG	15, 16, 17	TOSHIBA	09
MAGNAVOX	03	ZENITH	04
MITSUBISHI	13

≥Test by turning on the TV and changing channels. Repeat the procedure until you find the code that allows correct operation.

≥If your TV brand is not listed or if the code listed for your TV does not allow control of your TV, this remote control is not compatible with your TV.

∫Selecting TV type

You do not have to change the setting when connected to a 4:3 standard aspect TV that is not compatible with progressive output. (l 64)

[1]While stopped

Press [FUNCTIONS].

[2]Select “Other Functions” with [3, 4] and press [ENTER].

[3]Select “SETUP” with [3, 4] and press [ENTER].

[4]Select “TV Screen” with [3, 4] and press [2, 1].

The unit’s remote control code

Change the code on the remote control to match the main unit’s code (l step 7).

∫To return to the previous screen

Press [RETURN].

∫To exit the screen

Press [RETURN].

[5]Select “TV Type” with [3, 4] and press [ENTER].

SETUP	TV Type
	4:3 TV
	Aspect 4:3 & 480i
Channel	Aspect 4:3 & 480p
Setup	16:9 Widescreen TV
Disc	Aspect 16:9 & 480i
Video	Aspect 16:9 & 480p
Audio
Display
TV Screen	ENTER

≥Aspect 4:3/Aspect 16:9:

	4:3		16:9
4:3 standard aspect TV		16:9 widescreen TV

≥480p/480i:

Select “480p” if the TV is compatible with progressive output.

[6]Use [3, 4] to select the item and press [ENTER].

∫To return to the previous screen

Press [RETURN].

∫To exit the screen

Press [RETURN].

19

VQT0N92