Panasonic DMR-ES30V Inserting a video cassette, Video cassette information, ∫ Video cassettes

Playback VHS

Inserting a video cassette

The surface on which you can see a roll of tape should face up,

Insert a video cassette.

≥The unit is automatically turned on.

∫To eject a video cassette

≥You can eject a video cassette even when the unit is in standby mode. It switches back to standby once it ejects the video cassette.

For main unit

≥Press [<, EJECT] on the main unit.

For remote control

≥Press [VHS] and then press and hold [∫, STOP] for about 3 or more seconds.

Video cassette information

∫Video cassettes

≥Break off the video cassette’s tab to prevent accidental erasure. Cover the hole with a double layer of adhesive tape when you want to use the video cassette for recording again.

≥You can use video cassettes with the VHS and S-VHS marks, but the unit is unable to make full use of the characteristics of S-VHS video cassettes.

Tab

∫Video cassette care

≥Poor quality or damaged video cassettes can cause the heads to become dirty and malfunction. Store your video cassettes carefully and discard them when they become dirty or damaged.

≥Never use video cassettes on which juice has been spilled or those that are extremely damaged since this will not only cause the heads to become dirty, but will also make the unit malfunction.

∫Maintenance

Cleaning the video heads

Dirt on the video heads can cause poor recording and play.

If the picture does not improve, use an optional head-cleaning cassette (part number NV-TCL30PT). If the problem persists, seek advice from a qualified service person.

48

VQT0N92