FUNCTIONS | DVD VHS |
Setup | AV2 Settings |
| |
Tuning | AV2 Input | Video | |
|
| ||
Disc | AV2 Connection | Ext | |
Picture | Ext Link | Ext Link 2 | |
Sound |
| Ext Link | |
Display |
| ||
|
| ||
Connection | Ext Link 1 | ||
VHS | Ext Link 2 | ||
Others | |||
SELECT |
| ||
|
| ||
| ENTER |
| |
| RETURN |
| |
Timer recording via external units
Setting for external units (EXT LINK)
You control the recording function via an external unit (e.g. a receiver) with EXT LINK. Connect the unit to the AV2 socket with a
Press FUNCTIONS, select [To Others] with 
and press ENTER.
Select [Setup] with 
and press ENTER.
Select [Connection] with 
and [AV2 Settings] with 
, 
and press ENTER.
Select [Ext Link] with 
and confirm with ENTER.
Select [Ext Link 1] or [Ext Link 2] with 
and confirm with ENTER.
Press RETURN multiple times to return to the television picture.
Ext Link 1: For digital receivers that send a special recording control signal, e.g. the F.U.N. receiver
Ext Link 2: External recording control for satellite or digital receivers (video signal). The Ext Link 2 setting cannot be used if the input signal is in NTSC format.
The beginning of the recording may not be recorded correctly.
Recording programming on an external unit
The programming for a timer recording takes place on an external unit. Read the operating instructions for your external unit.
Switching the DVD Recorder to recording standby mode
Select recording drive DVD or VHS with DRIVE SELECT.
Press EXT LINK.
Recording standby mode for EXT
The recording begins if an appropriate signal is received from a connected unit. As long as this signal is transmitted by the external unit, the selected drive will record it.
Switching off recording standby mode
Press EXT LINK to switch off recording standby mode.
Prematurely cancelling recording
Stop the transfer of the recording signal on the external unit.
Press EXT LINK to switch off recording standby mode.
36
