Connections
|
| 1Aerial |
| Aerial infeed line | |
| S | RF IN |
Aerial input | ||
|
|
|
|
| RF IN |
|
|
|
| COMPONENT VIDEO OUT | Y |
|
| L |
|
| P |
|
|
|
|
| |
| OPTICAL |
|
| S VIDEO OUT |
|
|
|
| S VIDEO OUT |
| |
|
| R | VIDEO OUT | P | |
| DIGITALAUDIO OUT |
|
| RF OUT | |
AC IN | AUDIO OUT | AV2(DECODER/EXT) |
| ||
|
| AV 1 (TV) |
|
AC IN~ | L | RF OUT |
Aerial output
R | VIDEO OUT |
AUDIO OUT
3 Audio cable
LWhite
4 | AC Mains lead | R Red | 3 S VIDEO- |
| cable | ||
|
|
| |
| VT |
|
|
S
Aerial input
2 RF Coaxial cable
4AC Mains lead
Settings
Connection with S VIDEO-cable (not provided)
Depending on the television, the connection with the S VIDEO cable results in a higher quality picture than the connection with an Audio/ Video cable.
Disconnect all units from the power supply system.
1Connect the aerial to RF IN (Aerial input) of the DVD Recorder.
2Connect RF OUT (Aerial output) of the DVD Recorder with the aerial input of the TV.
3Connect AUDIO OUT (L/R) and S VIDEO OUT of the DVD Recorder with the S VIDEO and audio input of the TV.
4Connect the DVD Recorder and the television to the power supply system.
|
| Ch | 4 |
|
|
|
|
|
|
|
|
|
| ||
|
|
|
| ||||
|
| RETURN : to cancel |
|
|
|
|
|
| RETURN |
|
|
|
|
|
|
|
|
|
|
|
|
| |
|
|
|
|
|
| ||
|
|
|
|
|
| ||
|
| Download from TV |
|
|
| ||
|
| Pos |
|
|
|
|
|
|
| 4 |
|
|
|
| |
|
|
|
|
| |||
|
| Download in progress. Please wait. |
|
| |||
|
| RETURN : to cancel |
|
|
|
|
|
| RETURN |
|
|
|
|
|
|
|
|
|
|
|
|
| |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| Clock |
|
|
|
|
|
|
|
|
|
| |||
|
|
| Automatic | Off |
| ||
|
| Time | Date |
|
|
| |
|
| 0 : 00 : 00 | 1 . 1 . | 2006 | |||
| Number |
|
|
|
|
|
|
0 - - 9 | Clock cannot be set automatically. |
|
|
| |||
|
| Please set the clock manually. |
|
|
| ||
CHANGE | ENTER : store RETURN : leave |
| |
ENTER | RETURN |
|
Switch on your television and select the AV channel.
Switch on the unit using the Standby/On button.
Country
Select the corresponding country with 
and confirm with ENTER.
For EC models: If you select Schweiz, Suisse or Svizzera, the Power Save menu appears after auto setup. If you select Power Save [On], the unit’s power consumption reduced to a minimum in Standby mode.
Auto-Setup
The auto setup saves all avaiable television stations and takes approx. 5 minutes. If the station also broadcasts Date and Time, the time will be set automatically.
If the automatically set time does not match the current time, you can set it manually.
Download from TV with 
(Registered trademark of Panasonic)
If your television is equipped with the Q Link feature, the stations are downloaded through the transfer of the station table.
In order to be able to use Q Link, the unit must be connected to a TV with Q Link or a similar feature via a fully wired
Setting the date and time
If the Date and Time are not transferred via a television station, the Clock menu appears.
Change Time and Date with | or 0 | 9 and . |
Confirm the change with ENTER.
An incorrect date or time affects the programmed recording of television programmes (observe summer and winter time).
SELECT ENTER
TV Aspect
16:9 WIDE TV
16:9
4:3 TV
4:3 Letterbox
RETURN
TV Aspect
Select the desired screen format with 
and confirm with ENTER.
Auto setup for your unit is complete. The availability of stations may differ regionally. The completeness of the downloaded stations can be checked in the Setup menu. 46 
11
