Recording

DVD VHS

AV3 S VIDEO IN VIDEO IN L/MONO AUDIO IN R

S VIDEO-cable

Audio cable

L- White R - Red

AV3 S VIDEO IN VIDEO IN L/MONO AUDIO IN R

Audio/Video cable

Video - Yellow

L - White

R - Red

Recording in dual-channel audio

On DVD-RAM, both channels of a programme in dual-channel sound are recorded.

Use AUDIO to switch between the two recorded sound tracks.

Specifying a time as the recording duration

This function is not available for Timer Recordings.

￿Press REC on the unit during recording.

The recording time changes each time the button is pressed on the unit display:

OFF

0:30

1:00

1:30

2:00

3:00

4:00

OFF

￿Press STOP . The recording is paused and the time setting is deleted.

The unit switches itself off at the end of the recording if no functions are being executed on another drive. This function is not possible during a Timer- or Ext Link recording.

DVD: This function is not possible with Flexible Rec. If the channel or recording mode (XP, SP, LP, EP) is changed while recording is paused, the time is deleted.

VHS: If the tape speed is changed during the recording, a slight picture distortion will occur at that point.

DVD playback during recording

RAM

During the recording, you can the playback from the beginning of the programme.

￿Press PLAY during recording or Timer Recording

At least 2 second must have elapsed since the beginning of the recording.

DIRECT TV REC

Direct TV recording

If your TV is equipped with Q Link, you can record a TV programme that you are currently watching. Other settings are not necessary. The recorder automatically switches to the appropriate station.

It works to the selected drive when the button is pressed.

￿Press DIRECT TV REC for 3 seconds. Recording begins.

￿Press STOP to stop the recording.

Recording from an external unit, e.g. a camera

￿Connect the external unit to the AV3 input sockets on the front side of the unit.

￿Select one of the two connection options.

The S VIDEO-cable and audio cable (L/R) connection delivers the best quality.

You cannot receive signals from PCs with this unit.

Recording to VHS: Insert a video cassette with an intact write-protection tab.

￿Select the VHS drive with DRIVE SELECT.

￿Select the recording mode with REC MODE.

￿In STOP mode, use INPUT SELECT to select input channel AV3.

￿Press PLAY .

￿At the point where you wish to start recording press PAUSE .

￿Press REC.

￿Start playback on the external unit.

￿Then press PAUSE to start the recording.

￿Use STOP to stop the recording.

Recording to DVD: Insert a recordable disc.

If you activated the write protection, cancel it.

RAM

￿Select the DVD drive with DRIVE SELECT.

￿Select recording mode with REC MODE.

￿In STOP-mode use INPUT SELECT to select input channel AV3.

￿Start playback on the external unit.

￿Press REC at the point where you want to start the recording.

￿Use STOP to stop the recording.

Selecting the sound track to record for programmes with dual-channel sound Not RAM

￿Before recording, select Sound setting Bilingual Audio Selection [M1] or [M2]

in the Setup menu.

49

Select [M1] or [M2] on an external unit before recording.

 

￿If the output signal of the external unit is an NTSC signal, set the TV System

to [NTSC] in the Setup menu.

50

25

Page 25
Image 25
Panasonic DMR-ES35V Recording in dual-channel audio, Specifying a time as the recording duration, Direct TV recording