Panasonic DMR-ES35V Setup Sound Setting, DVD-VOn Off Dolby Digital Only, Digital Audio Output

FUNCTIONS

FUNCTIONS			To Others
Setup	Dynamic Range Compression			Off
Tuning	Bilingual Audio Selection			M 1
	Digital Audio Output
Disc
	Audio Mode for DV Input			Stereo 1
Picture
Sound
Display
Connection			TAB
VHS		SELECT
Others		ENTER	RETURN

Setup	Digital Audio Output
Tuning	PCM Down Conversion		Off
	Dolby Digital		Bitstream
Disc
	DTS		Bitstream
Picture
Sound	MPEG		PCM
Display
Connection	SELECT	Dolby Digital
VHS
	ENTER	Bitstream
Others
		PCM
	SELECT
	ENTER
	RETURN

DVD VHS

Setup

Sound	Setting	ENTER	Option	ENTER
Dynamic Range Compression		DVD-V[On] [Off] (Dolby Digital Only)

On: The level of quieter passages increases and the level of louder passages decreases. The audio can be clearly understood even when the volume is lowered.

Bilingual Audio Selection -R -R DL -RW(V)+R +R DL +RW [M 1] [M 2]

If you want to record programmes that are broadcast in dual-channel sound, you can select between the original language [M1] or another available language [M2]. If you are copying from an external source or from a tape position, select the sound track on the other unit.

Digital Audio Output	[PCM Down Conversion]
	[Dolby Digital] [DTS] [MPEG]

Select the appropriate setting if you have connected an external unit to the DIGITAL AUDIO OUT of the DVD Recorder.

PCM Down Conversion [On] [Off]

Select the audio output mode for a scan frequency of 96 kHz or 88.2 kHz. Despite this setting, signals are converted to 48 kHz or 44.1 kHz if they have a scan frequency over 96 kHz or 88.2 kHz or if the disc is copy-protected.

On: The connected unit cannot process signals with a scan frequency of 96 kHz or 88.2 kHz. Signals are converted with 48 kHz or 44.1 kHz.

Off: The connected unit can process signals with a scan frequency of 96 kHz or 88.2 kHz. Signals are output as 96 kHz or 88.2 kHz.

Dolby Digital, DTS, MPEG [Bitstream] [PCM]

Bitstream: The connected unit can decode the corresponding signal.

PCM: If the connected unit cannot decode the corresponding signal, the setting must be changed to [PCM]. Otherwise, the loud noise can lead to damage to your hearing or loudspeakers. Make the necessary changes depending on your audio system.

Audio Mode for DV Input	-R	-R DL	-RW(V)	+R	[Stereo 1] [Stereo 2] [Mix]
			+R DL	+RW

Select the audio type when copying from the DV input.

Stereo 1: Original sound; Stereo 2: Voice-over, Mix: Original sound + voice-over

Setup	Language		English
Tuning	On-Screen Messages		Automatic
	Grey Background		On
Disc
Picture	FL Display		Bright
Sound
Display
Connection	TAB	SELECT
VHS		RETURN
Others

Display	Setting	ENTER	Option	ENTER
Language			[English]
Select the menu language.
On-Screen Messages			[Automatic] [Off]

Automatic: The on-screen displays are displayed on the screen.

Grey Background [On] [Off]

On: The grey background is displayed when there is no television reception.

FL Display [Bright] [Dim] [Automatic]

Dim: Changes the brightness of the display on the unit.

Automatic: The display goes dark during playback. It lights up again when a button is pushed. If the unit is switched off, the display turns off.

49