Panasonic DMR-HS2 Disc handling, STEP 1 The remote control, Use, Batteries

Getting started	Disc handling
	Do not use irregularly shaped discs, such as heart-shaped.
	(These can damage the unit.)

∫How to hold a disc

up	Do not touch the recorded surface.
Setting

∫If there is dirt or condensation on the disc

!?

Moisture may condense on discs after they are brought inside from the cold.

DVD-RAM and DVD-R

Clean only with the DVD-RAM/PD disc cleaner available as an optional accessory, part number LF-K200DCA1.

Do not use cleaners or cloths for CDs to clean DVD-RAM and DVD-R.

DVD-Video, CD, Video CD

Wipe with a damp cloth and then wipe dry.

∫Handling precautions

≥Do not write on the label side with a ball-point pen or other writ- ing instrument.

≥Do not use record cleaning sprays, benzine, thinner, static elec- tricity prevention liquids or any other solvent.

≥Do not attach labels or stickers to discs. (Do not use discs with exposed adhesive from tape or left over peeled-off stickers.)

≥Do not use scratch-proof protectors or covers.

≥Do not use discs printed with label printers available on the mar- ket.

≥Do not use discs that are badly warped or cracked.

∫Do not place or store discs in the following

STEP 1 The remote control

Batteries

!?

R6, LR6, AA, UM-3

≥Insert so the poles (i and j) match those in the remote control.

≥Do not use rechargeable type batteries.

Do not:

≥mix old and new batteries.

≥use different types at the same time.

≥heat or expose to flame.

≥take apart or short circuit.

≥attempt to recharge alkaline or manganese batteries.

≥use batteries if the covering has been peeled off.

Mishandling of batteries can cause electrolyte leakage which can damage items the fluid contacts and may cause a fire.

Remove if the remote control is not going to be used for a long period of time. Store in a cool, dark place.

[Note]

If you cannot operate the unit or television using the remote control after changing the batteries, please re-enter the codes (television➜ page 17, main unit ➜ page 65).

Use

!?

Remote control signal sensor

	Í/I
20x	OPEN/CLOSE
	REC
	WARP
	TOP
30x	RETURN
	30x

places

≥Locations exposed to direct sunlight

≥Humid or dusty locations

≥Locations directly exposed to a heat vent or heating appliance

20x

7 m (23 feet) directly in front of the unit

10

Aim at the sensor avoiding obstacles, at a maximum range of 7 m (23 feet) directly in front of the unit.

RQT6570