Playing back

Changing audio !?

∫ While playing HDD or DVD-RAM

LR

[HDD] [RAM] [DVD-V] [VCD]

You can change the audio being received or played.

During reception or play

Press [AUDIO].

How the type changes depends on when you press the button.

∫When receiving MTS audio (Multi-channel Tele- vision Sound Stereo) or recording through the

DV input terminal

Stereo > SAP > Mono

^--------------------------------}

Depending on the type of television broadcast and sound selected, received and recorded sound is as follows:

§1 Select “Mono” if reception is poor during a stereo broadcast.

§2 If recorded in this mode, main audio is also recorded. Consequently it is possible to choose between MAIN and SAP when playing back.

[Note]

≥If you alter the sound setting during recording, the sound will be altered in the recording itself also.

≥It will not be possible to alter the sound by pressing [AUDIO] in the following cases:

-When the DVD drive is selected and a DVD-R is in the disc tray.

-When recording mode is XP and LPCM has been selected in the SETUP menu, Audio Mode for XP Recording (➜ page 61).

≥You cannot change audio type while recording with DVD-R or record- ing on DVD-RAM with LPCM sound. You can use the SETUP menus to select which audio type of an SAP broadcast is recorded, either “Main” or “SAP” (➜ page 61, Audio—Select MTS for DVD-R or LPCM).

≥When recording through the DV input terminal, the unit records the audio data as is from the tape, irrespective of the type you select

30 with [AUDIO] (➜ page 61, “Select Audio CH for DV input”).

RQT6570