Once activated, material cannot be returned to its original form, including protected still pictures. Check carefully before proceeding.

Press [3, 4, 2, 1] to select a still picture and press [ENTER].

A check mark appears on the still picture.

0001

Repeat this if you erase more than one still picture.

Press [3, 4, 2, 1] to select “Erase” and press [ENTER].

A confirmation screen appears.

Press [2] to select “Erase” and press [ENTER].

Selected still pictures are erased, and the still picture select screen reappears.

To select all the still pictures in the folder

To erase check marks

Press [3, 4, 2, 1] to select “Folder” and press [ENTER].

Press [3, 4, 2, 1] to select the folder or still picture with the check

(A check mark appears on the folder’s name; check marks

mark and press [ENTER].

inputted separately will be erased.)

 

Press [3, 4, 2, 1] to select a still picture and press [ENTER].

A check mark appears on the still picture. 0001

Repeat this if you set protection of more than one still picture.

To select all the still pictures in the folder

Press [3, 4, 2, 1] to select “Set Up” or “Cancel” and press [ENTER].

To erase check marks

Press [2] to select “Yes” and press [ENTER].

The lock symbol appears on the still picture when the still picture is protected.

Editing

Press [3, 4, 2, 1] to select “Folder” and press [ENTER]. (A check mark appears on the folder’s name; check marks inputted separately will be erased.)

Press [3, 4, 2, 1] to select the folder or still picture with the check mark and press [ENTER].

Press [3, 4, 2, 1] to select a still picture and press [ENTER].

A check mark appears on the still picture.

0001

Repeat this if you print more than one still picture.

Press [3, 4, 2, 1] to select “Set Up” and press [ENTER].

Press [2, 1] to set number of print (0 to 9).

Press [3, 4, 2, 1] to select “Set” and press [ENTER].

The DPOF mark appears if you set one or more pictures to print.

To select all the still pictures in the folder

Press [3, 4, 2, 1] to select “Whole” and press [ENTER]. (A check mark appears on the folder’s name; check marks inputted separately will be erased.)

To change print (DPOF) settings

1.Press [3, 4, 2, 1] to select “Whole” or a still picture with the DPOF mark and press [ENTER].

2.Press [3, 4, 2, 1] to select “Set Up” and press [ENTER].

3.Press [2, 1] to change the print setting

The print setting will be canceled if you set the number of print to “0”.

4.Press [3, 4, 2, 1] to select “Set” and press [ENTER].

Once activated, recorded contents (including protected still pictures and computer data) will be completely erased. Check carefully before proceeding.

Press [2] to select “Yes” and press [ENTER].

Press [2] to select “Start” and press [ENTER].

Format begins.

[Note]

The cards formatted on this unit may not be usable on other equipment.

49

RQT6570