STEP 5 Selecting TV screen type

3 Press [3, 4] to select “TV Aspect” and press [ENTER].

Setting up

4 Press [3, 4] to select “16:9” and press [ENTER].

Change the settings if you:

Connect the unit to a widescreen 16:9 aspect television.

Set “TV Aspect” to “16:9”.

Connect the unit through the COMPONENT VIDEO OUT terminals (page 11) to a television compatible with progressive video signals (480P).

Set “TV Type” to “480P”.

1 Press [SET UP] to show the menus.

2 Press [3, 4] to select “TV Screen” and press [1].

16

3 Press [3, 4] to select “TV Type” and press [ENTER].

4 Press [3, 4] to select “480P” and press [ENTER].

When playing back, select Video in the on-screen menu and set “Transfer” according to the type of material being played (page 52).

To return to the previous screen

Press [RETURN].

When you are finished

Press [SET UP].

Regarding Progressive Television Picture

Progressive image aspect (height to width ratio) is set at a standard 16:9. DVD-Video which has been set at 16:9 will be displayed correctly. However, 4:3 video material (below) will be stretched to the right and left when displayed.

To view the picture at the right aspect

For televisions that allow the aspect of progressive images to be adjusted, use the function provided on the television and adjust as necessary.

For televisions which do not allow the aspect of progressive

images to be adjusted, please turn OFF “Progressive” (page 52).

4:3 video materials are usually found

In general television broadcasts (excluding some wide picture broadcasts) and any pictures from discs that recorded such programs.

In DVDs with an aspect ratio of 4:3 indicated on the jacket.

DVD-R or Video CD pictures

RQT6570