
Error messages
On the television |
| Page | |
No disc. | ≥You haven’t inserted a disc. Correctly insert a disc that this unit can use. | 8 | |
| ≥The disc is upside down. If it is a | 18 | |
|
|
| |
This is | ≥The unit cannot record on the disc you inserted. The unit cannot record onto finalized | 8 | |
|
| ||
This disc is not formatted |
| ||
≥You inserted an unformatted | 38 | ||
properly. | |||
|
| ||
Please format the disc in |
|
| |
‘DISC SETTING’ to record. |
|
| |
|
|
| |
This disc cannot be read. | ≥You inserted an incompatible disc. Insert a compatible disc. | 8 | |
|
|
| |
Please check write protect | ≥The |
| |
tab on the disc. | Use a ballpoint pen or similar to release the write protection. |
| |
|
| — | |
| PROTECT |
| |
|
|
| |
Contents of this disc are | ≥The program is | 40 | |
protected. | ≥The disc is | 38 | |
|
|
| |
Cannot finish recording | ≥The program was | — | |
completely. | ≥No space left on HDD, | — | |
| ≥The connection from the external device (DV equipment etc.) was lost during recording. | — | |
| ≥Recording was not completed for some other reason. | — | |
|
|
| |
Cannot record. | ≥The disc is scratched. Use another disc. | — | |
| ≥The disc is dirty. | 10 | |
| ≥You inserted an incompatible disc. Insert a compatible disc. | 8 | |
|
|
| |
HDD is full. | ≥No space left on HDD, |
| |
Disc is full. | ➜ Create space by erasing any unwanted programs. [HDD] [RAM] | 38, 40 | |
| ➜ Use a new disc. [RAM] | — | |
| ➜ Erase any unwanted files (still pictures). | 48 | |
| ≥You may record up to 300 folders and 3000 files (still pictures) using this unit. | — | |
|
|
| |
Cannot dub from this disc. | ≥Dubbing prohibited disc in tray.➜ Dubbing to the HDD is not possible. | — | |
|
|
| |
Please set clock. | ≥The clock is not set. Set the clock. | 64 | |
|
|
| |
This disc may not be played | ≥You tried to play a disc with a region number different from this unit’s region number. This unit can | Cover | |
in your region. | only play discs with the region numbers compatible with this unit (1, All, or including the number 1). | page | |
|
|
| |
Your selection exceeds the | ≥A ratings level has been set for | 62 | |
recorder’s rating limit. | Unlock the unit with “Ratings” in “Disc” in the SETUP menu. | ||
| |||
|
|
| |
Cannot play back on this unit. | ≥You tried to playback incompatible pictures (TIFF images and MOTION JPEG cannot be played back). | 9 | |
|
|
| |
No PC CARD | ≥The PC card is not inserted. If this message is displayed with a compatible PC card already | 25 | |
No valid PC card | inserted, turn off the power, remove and then |
| |
| ≥The PC card format does not match. | 9 | |
| ≥The PC card inserted is not compatible. | 9 | |
|
|
| |
No | — | ||
| 38 | ||
| (Even if this message is displayed, it may sometimes be possible to playback moving picture parts.) |
| |
|
|
| |
Please check write protect | ≥Release the protection on the PC card. | 9 | |
tab. | ≥Release the protection on the | 8, 38 | |
|
|
| |
No folder | ≥There is no compatible folder in this unit. | 9 | |
|
|
| |
Cannot write. | ≥The PC card is currently protected ➜ Release the write protection. | 9 | |
| ≥There is no space remaining. ➜ Erase any unwanted files (still pictures). | 48 | |
|
|
| |
Finalizing is necessary for | ≥To enable playback of your | 38 | |
compatible playback. |
| ||
|
| ||
|
|
|
Reference
On the unit’s display
U11 | ≥The disc is dirty or badly scratched. | 10 | |
NO DISC |
| ||
| – The disc cannot be played if it is scratched and this display doesn’t disappear. |
| |
| ≥You have inserted a disc the unit cannot play or record on. |
| |
| – Insert a disc the unit can play or record on. | 8 | |
| ≥Cleaning has been carried out using |
| |
| ➜ Cleaning is finished. Press [< OPEN/CLOSE] and remove the disc cleaner from the disc tray. | — | |
|
|
| |
U14 | ≥The unit is hot. |
| |
!? | – The unit switches to standby automatically for safety reasons and you cannot operate it. Wait for | — | |
about 30 minutes for the service number to disappear. | — | ||
| – Select a position with good ventilation when installing the unit. | ||
| – Do not block the cooling fan on the rear of the unit. | — | |
|
|
| |
U99 | ≥The unit fails to operate properly. |
| |
| – Press [Í, DVD POWER] to switch the unit to standby. Now press [Í, DVD POWER] again to turn | — | |
| the unit on. | ||
|
| ||
|
|
| |
CHK REMOTE | ≥The remote control and main unit are using different codes. |
| |
– Change the code on the remote control or main unit. | 65 | ||
| |||
|
|
| |
RECOVER | ≥If there is a power failure or the AC plug was disconnected while the power was on. | — | |
➜ The unit is carrying out its recovery process. Wait until the message disappears. | |||
|
|
67
RQT6570