
Changing the unit’s settings
DVD POWER TV |
| |
| DVD | TV |
Í | Í |
|
VCR Plus+ TV/VIDEO REC MODE | REC |
| 1 | 2 | 3 | |
Numbered |
|
| CH | |
4 | 5 | 6 | ||
buttons |
|
| VOLUME | |
| 7 | 8 | 9 | |
CANCEL | CANCEL |
| ||
| 0 | 100 | ||
|
|
| SLOW/SEARCH | |
| HDD | DVD |
| |
| DIRECT NAVIGATOR | PLAY LIST | ||
| TOP |
| MENU | |
| MENU |
|
| |
3, 4, 2, 1 |
| ENTER | ||
ENTER |
|
| RETURN | |
| FUNCTIONS |
| ||
|
| RETURN | ||
| PROG/CHECK | ADD/DLT | DISPLAY TIME SLIP | |
| OPEN/CLOSE STATUS | SKIP | ||
SET UP | SET UP | AUDIO | INPUT SELECT CM SKIP | |
ERASE | DUBBING | POSITION MEMORY MARKER | ||
|
operation | See page 60 for menu and option details. | ||
1 | SET UP |
| |
| While stopped | ||
|
| Press [SET UP] to show the menus. | |
Advanced |
|
| Antenna System CATV |
|
| Auto Channel Setting | |
|
|
| |
|
| Channel | Channel Caption |
|
| Preset Channel Caption | |
|
| Set Up | |
|
| Manual Channel Caption | |
|
| Disc | |
|
|
| |
|
| Video | VCR PlusiCH Setting |
|
| Audio |
|
|
| Display | Tab SELECT |
|
| TV Screen | RETURN |
Tabs Menus Options
2 Press [3, 4] to select the menu’s tab and press [1].
3 Press [3, 4] to select the menu and press [ENTER].
4 Press [3, 4] to select the option and press [ENTER].
The screen now shows the menu again.
≥Some items require different operations. Read the following explanations.
To return to the previous screen
Press [RETURN].
When you are finished
Press [SET UP].
62
Entering a password (Ratings)
!?
The password screen is shown when you select levels 0 to 7.
1.Input a
≥If you enter a wrong number, press [CANCEL] to erase it.
2.Press [ENTER].
≥The lock symbol appears closed to show the rating is locked. ≥Do not forget your password.
3.Press [ENTER] to confirm the 4 digits.
If you insert a
Follow the
Digital Audio Output
Change the settings when you have connected equipment through this unit’s DIGITAL AUDIO OUT terminal (➜ page 57, [A]).
Select the “Audio” tab and then “Digital Audio Output” by following “Common procedures” (➜ left) to set up “PCM Down Conversion”, “Dolby Digital” and “DTS”.
PCM Down Conversion
Select how to output audio with a sampling frequency of 96 kHz. Select “On” if the equipment you connect cannot process signals with a sampling frequency of 96 kHz.
≥Select “Off” if you use analog connect irrespective of the type of equipment.
Off (Factory preset):
Output as 96 kHz. There is no output if the disc has copy protection. Select “On” in this case.
On:
Converted to 48 kHz for output.
Dolby Digital and DTS
!?
Bitstream (Factory preset for Dolby Digital):
Select if the equipment you connected can decode the signal.
PCM:
Select if the equipment you connected cannot decode Dolby Digital signal.
Off (Factory preset for DTS):
Select if the equipment you connected cannot decode DTS signal.
IMPORTANT
If the equipment you connected cannot decode the signal, the setting must be changed to PCM or Off. If not, signals the equipment cannot process will be output by this unit, causing high levels of noise which can damage your hearing and the speakers.
RQT6570