Panasonic DP-1810F Problem Solving/U13, Adding the Toner and Replacing Toner Waste Container ?

Problem Solving/U13

Adding the Toner and Replacing Toner Waste Container (?)

1	Open the Front Cover.
2	Remove the Toner Waste Container by
	slowly pulling it towards the left as
	illustrated.

3

Cap

Seal the container with the enclosed cap and dispose of it properly.

4	1
	2

#Turn the empty Toner Bottle

counter-clockwise until it stops. The Arrow mark (Unlocked symbol ) visible on the end of the Toner Bottle is aligned with the Arrow

mark on the machine.

Note: To prevent toner spill, ensure that the key is facing upwards before removing the toner bottle.

$Pull the empty Toner Bottle out. Note: If the bottle will not pull out from

the machine, turn the bottle slightly in either direction to release the key and try it again.

J

?

ATTENTION	CFor optimum copy quality use the recommended Panasonic toner. Store toner in a cool
	dark place. Do not unseal toner before use. Use it as fast as possible after unsealing.

CWhen U13 is displayed the Add Toner Warning Indicator will begin to flash. This message is to prompt you that the toner bottle is nearly empty (approx. 300-sheets can be printed). This message will continue to be displayed until the bottle is replaced. When the count- down counter reaches 0, the copier will stop operating. To clear the message and enable the copier to operate, replace the empty toner bottle with a new one.

39