Specifying the time code (TC PRESET)
Set TC PRESET so you can record a value of your choice as the initial setting for the time code to be used at the start of recording.
1 Set the POWER switch to ON.
POWER
ON
OFF
2 In the setup menus, RECORDING SETUP screen FIRST REC TC, select PRESET.
•For menu operation (Page 66)
•You can also use the menu buttons on the remote control. (Page 19)
RECORDING SETUP
REC SPEED | SP |
AUDIO REC | 48K(16bit) |
MIC ALC | ON |
MIC GAIN1 | |
MIC GAIN2 | |
TC MODE | DF |
TCG | REC RUN |
FIRST REC TC |
|
PUSH MENU TO RETURN
3 Move the OPERATION lever r to select TC PRESET.
RECORDING SETUP
TC PRESET |
| USER |
UB MODE | ||
UB PRESET | - - - - | |
OFF | ||
REC TIME | 0.5S | |
PUSH MENU TO RETURN
4 Press the OPERATION lever [h] (or move it y), move it r to move to select YES and press [h] again.
RECORDING SETUP
TC PRESET |
| YES |
UB MODE | ||
UB PRESET | - - - - | |
OFF | ||
REC TIME | 0.5S | |
PUSH MENU TO RETURN
5 The following screen appears, so use the OPERATION lever to set the time code.
TC PRESET |
| |
0 0 h 0 0 m 0 0 s 0 0 f |
| |
| ||
SEL : PUSH REW/FF |
| |
PUSH MENU TO RETURN | Preparations | |
Move the OPERATION lever e or r to | ||
| ||
change the time code. |
| |
TC PRESET |
| |
1 0 h 0 0 m 0 0 s 0 0 f |
|
SEL : PUSH REW/FF
PUSH MENU TO RETURN
Move the OPERATION lever t or y to move to the next digit.
TC PRESET
1 0 h 0 0 m 0 0 s 0 0 f
SEL : PUSH REW/FF
PUSH MENU TO RETURN
You can reset the time code to zero by pressing
COUNTER RESET.
| DATE/ | PHOTO | START/ |
| STOP | ||
OSD | TIME | SHOT |
|
COUNTER RESET | TITLE | ZOOM | |
MULTI/ | REC | A.DUB |
|
+ | |||
|
|
| - VOL |
/REW | PLAY | FF/ |
|
Camera | or Remote control |
29