Panasonic DVX100B Setup menu list

Setup menu list

SCENE FILE screen

Item/		Item/
(Display	Description of settings	Display		Description of settings
mode)		mode)
DETAIL LEVEL	Adjusts the amount of detail.	GAMMA		Selects gamma curve.
(camera)	-7 - 0 - +7	(camera)		LOW:
				Using the gamma curve, which the
V DETAIL	Adjusts the level of outline correction in
LEVEL	vertical screen.			slope of low-brightness is modest,
(camera)	-7 - 0 - +7			makes it staid image. The contrast
				become sharp.
DETAIL	Adjusts the level of removing noises of
				NORMAL:
CORING	the detail signal.
				Makes standard images.
(camera)	-7 - 0 - +7
				HIGH:
	Set to - for a clearer image. Noise
				Using the gamma curve, which the
	increases slightly.
				slope of low-brightness is modest,
	Set to + to decrease noise.
				spreads out the tone of dark parts
CHROMA	Adjusts chroma level.
				and makes it bright image. The
LEVEL	-7 - 0 - +7
				contrast become soft.
(camera)
				B.PRESS:
CHROMA	Finely adjusts chroma phase.			Makes the contrast sharper than
PHASE	-7 - 0 - +7			LOW.
(camera)				CINELIKE:
				Uses the gamma curve to complete
COLOR TEMP	Finely adjusts color temperature (after
(camera)	adjusting white balance).			the cine-line image. Images have
	-7 - 0 - +7			less noise than CINELIKE_D.
				CINELIKE_D:
MASTER PED	Adjusts the black master pedestal as
				Dynamic range is higher than
(camera)	the basis for images.
				CINELIKE.
	-15 - 0 - +15
				CINELIKE_V:
A. IRIS LEVEL	Sets AUTO IRIS level.
				Uses the gamma curve to complete
(camera)	-4 - 0 - +4
				the cine-like image of the emphasis
				on contrast.
				• When CINELIKE Gamma is selected,
				we recommend that the lens aperture
				is set to the lower level (about 1/2)
				than normal image level for making
				full use the characteristics.
		KNEE		To avoid an over exposure, use this to
		(camera)		set the compression level (knee point)
				of the high-intensity video signals
				which the CCD received.
				AUTO:	Menus
				Sets the level automatically
				according to the received signals.
				LOW:
				Low setting (compression begins
				from approximately 80%)
				MID:
				Medium setting (compression begins
				from approximately 90%)
				HIGH:
				High Setting (compression begins
				from approximately 100%)
			are the factory settings.

69