Screen displays (continued)

9Mic level auto control

Appears when in the setup menus, RECORDING SETUP screen, MIC ALC, you have selected “ON”.

10Auto iris control displays

19Calendar

Month:

JAN (January), FEB (February), MAR (March), APR (April), MAY (May), JUN (June), JUL (July), AUG (August), SEP (September), OCT (October), NOV (November),

STD

: Standard auto-iris control

SPOT

: Auto iris control for spotlight

BACK

: Auto iris control for backlight

 

compensation

11 Shutter speed

The shutter speed is normally displayed here.

“SLOW” appears when using the slow shutter

speed.

When the ZEBRA button is pressed to display

the markers (Page 33), the brightness level

DEC (December)

mmm dd yyyy hh:mm:ss

Day of the

month:

Year:

2002 - 2089 Hours:

Minutes:

Seconds:

 

around the center of the screen is indicated as

 

0% to 99%. “99%K“appears if the percentage is

 

over 99.

12

Audio sampling frequency

13

AWB error

 

LOWLIGHT

 

Appears when the brightness level adjusted by

 

the auto white balance is too low.

14

Audio level meter

34 dB

12 dB

0 dB

CH1

CH2

15Recommended ND filter

The recommended ND filter under the current shooting conditions is displayed here.

16Remaining tape

This is not displayed while being calculated. It is also not displayed during intermittent recording or slow playback.

17Remaining battery charge

As the remaining battery charge drops, the display changes as follows:

When the battery has completely discharged,

( ) blinks.

(When the AC adapter is being used, a display

other than may appear: this is not a sign of malfunctioning.)

18Monitor volume level meter

Press the AUDIO MON/VAR button to display the level meter showing the volume level of the sound that is output from the internal speaker and PHONES jack.

20INDEX record display

When the USER button allocated the Index function in advance is pressed during the recording, it will light when recording the index signal.

When you press the USER button before recording, it will light. (In the condition of waiting the index signal record)

21ND filter display

ND filter selected is displayed.

When [ND--] is displayed, the ND filter may be out of alignment. (OFF, the position except 1/8, 1/ 64)

Check the position of the ND filter switch.

22Gain display

Displays the gain value of the image amplifier configured.

23IRIS display Displays F value.

24AWB information display

Displays the information of white balance.

25Macro control display

26Focus control display

Displays the focus control information with 99-00. 95 (Focal distance: infinity)

:

50 (Focal distance: approx. 1 m)

36 and below (Macro)

:

00 (Focal distance: approx. 2 cm)

•Depending on the zoom position, the macro range may not be enabled.

Also, depending on the zoom position, the lower limit value of macro range may be different.

62