Connecting external units (continued)

Digital video equipment

This camera

Other Digital video equipment

1

S-

 

DV

VIDEO

IN/OUT

 

CH2 CH1

AUDIO VIDEO

IN/OUT IN/OUT

2

DV (IEEE1394)cable (optional) 4-pin type

g You can connect a digital video unit equipped with a DV connector and digitally transfer video and audio signals as well as time code.

•Before proceeding to connect or disconnect DV (IEEE1394) cable, be absolutely sure to turn off the power of the units.

•Before proceeding to connect the unit which uses a 6-pin type DV connector, carefully check the shape of the DV (IEEE1394) cable and the connectors on the DV (IEEE1394) cable. Connecting a connector upside down may damage the parts inside the unit and cause malfunctioning. Furthermore, connect the DV (IEEE1394) cable to the unit which uses a 6-pin type DV

connector first. ((1)(2))

6-pin

4-pin

• When recording signals from an external unit, first check that video signals

type

type

are supplied.

 

 

•While signals from an external unit are being recorded, do not stop output on the external unit side or disconnect any of cables. This may lead to a failure to recognize the signals when you do recording again.

•Do not apply force when connecting DV (IEEE1394) cable to DV connector as this may damage the connector.

54