Using scene files (continued)
6 The screen below is displayed, so set the file name of six letters using OPERATION lever. Set the same as user information (Page 27).
•Characters that can be set
Space, A to Z, 0 to 9, : ; < = > ? @ [ \ ]
7 After you finish setting the filename, press the MENU button.
8 Move the OPERATION lever r to select SAVE/ INIT.
| SCENE F1:- |
|
|
|
|
| |
GAMMA | NORMAL | ||||||
KNEE | AUTO | ||||||
MATRIX | NORMAL | ||||||
SKIN TONE DTL |
| OFF | |||||
V DETAIL FREQ |
|
|
|
|
| ||
PROGRESSIVE |
| OFF | |||||
NAME EDIT |
|
|
|
|
| ||
SAVE/INIT |
|
|
|
|
|
| |
|
|
|
|
|
|
|
|
| PUSH MENU TO RETURN | ||||||
9 Press the OPERATION lever (h) (or move it y) then move it r to select YES.
| SCENE F1:- |
|
|
|
|
|
| ||
GAMMA | NORMAL |
| |||||||
KNEE | AUTO |
| |||||||
MATRIX | NORMAL |
| |||||||
SKIN TONE DTL |
| OFF |
| ||||||
V DETAIL FREQ |
|
|
|
|
|
| |||
PROGRESSIVE |
| OFF |
| ||||||
NAME EDIT |
| YES |
| ||||||
SAVE/INIT |
|
|
| ||||||
PUSH MENU TO RETURN
10 The following screen appears, so press the OPERATION lever (h).
FILE F1: 
SAVE
INITIAL
PUSH MENU TO RETURN
11 The following screen appears, so move the OPERATION lever eto select YES, then press the OPERATION lever (h).
FILE F1: 
SAVE?
YES ___ PUSH STILL
NO
12 Ten beeps sound in succession, the message below appears, and the changes to the scene file are complete.
SAVE
COMPLETED !
13 Press MENU three times to exit the menus.
•The original scene file settings will be restored when the menu mode is released, the operation is switched to the VCR mode or when the power is turned off if SAVE has not been selected.
•To return the scene file settings to the factory settings, select INITIAL in step 10, then do steps 11 to 13.
46