Before calling for service (continued)

Other types of video recording

Cannot focus

• Make sure the camera is in manual mode.

P 36

automatically.

You can focus automatically when the auto focus mode is

 

 

selected.

 

• You may be shooting a scene where it is difficult to bring the

 

 

subject into focus in the auto focus mode.

 

 

If this is the case, focus in the manual focus mode.

 

 

It may be hard to bring the subject into focus when

 

 

* both close and distant objects are to be shot

 

 

* shooting through a dirty window

 

 

* shooting in a dark place

 

 

* there are sparkling or shiny objects around the subject

 

 

* the subject is moving fast

 

 

* shooting a scene with minimal contrast

 

 

 

 

Editing

Cannot perform audio

• Make sure the tab on the cassette tape for preventing accidental

P 15

dubbing.

erasure is not set to SAVE.

 

 

You cannot edit when the tab is in this position.

 

 

• You may be trying to edit a part that was shot in LP mode.

 

You cannot dub after recording in LP mode as the track on the

 

 

tape is thinner than the head.

 

 

 

 

Displays

Something is wrong

• The time code display may not register a regular count if a tape is

with the time code

played in the reverse slow mode. This is normal.

 

display.

 

 

The remaining tape

• The remaining tape is not displayed accurately if you shoot

display differs from the

continuously for periods of less than 30 seconds.

 

actual amount of tape

• The display may show 2 to 3 minutes less than the actual time

 

remaining.

remaining on the tape.

 

 

 

 

Playback (images)

Cannot play back a tape

• Make sure the VCR lamp is on (press the CAMERA/VCR button).

P 48

even when I press the

No kind of playback operation can be performed unless this lamp

 

play button.

is on.

 

Mosaic-like noise

• This noise is inherent to digital video technology. This is normal.

appears when I cue or

 

 

review a tape.

 

 

 

 

 

Images do not appear

• Make sure the input selector on your television is set to video

on the television even

input.

 

though I have

Read the television’s instructions carefully and select the correct

 

connected the camera-

video input connector for the camera-recorder.

 

recorder properly.

 

 

The playback images

• The camera-recorder’s heads may be dirty.

are not displayed

Images will not be displayed clearly if the heads are dirty.

 

clearly.

 

 

 

 

 

80