Setup menu list (continued)
SCENE FILE screen
Item/ |
|
(Display | Description of settings |
mode) |
|
|
|
|
|
MATRIX | Chooses a MATRIX table, and sets the |
(camera) | color for shooting. |
| NORM: |
| Makes colors suitable for a shooting |
| in the open air or in using a halogen |
| lamp as the source of light. |
| ENRICHED: |
| Makes colors brighter than the |
| NORM1 mode. |
| FLOU: |
| Makes colors suitable for shooting |
| indoors under fluorescent lights. |
| |
| Makes colors suitable for |
| shooting. |
|
|
SKIN TONE | Sets the skin tone details to ON or |
DTL | OFF. When ON is selected, skin tone |
(camera) | details are reduced, which softens the |
| skin tones. |
| ON OFF |
|
|
V DETAIL | Sets the vertical detail when shooting |
FREQ | in progressive mode. |
(camera) | THIN : Select this to thin the detail of |
| images. |
| MID : Select this to slightly thicken |
| the detail of images. |
| THICK : Select this to thicken the detail |
| of images. |
| • When images were shot in the |
| progressive mode in which the |
| vertical detail is set as “THIN” or |
| “MID” and are played on a monitoring |
| television (60i interlace), you will feel |
| flickers caused on horizontal lines |
| and almost horizontal oblique lines. |
| When you play images under the |
| progressive mode, set the detail as |
| “THIN” or “MID”. This gives you |
| higher resolution images than setting |
| the detail as “THICK”. |
|
|
Item/ |
|
(Display | Description of settings |
mode) |
|
|
|
|
|
PROGRESSIVE | Sets the shooting in progressive mode. |
(camera) | OFF: Select this to disable progressive mode. |
| 30P: Select this to shoot in 30P mode (30 |
| frames/second). |
| 24P: Select this to shoot in 24P mode (24 |
| frames/second). The tape is recorded in [2:3] |
| conversion. |
| 24P (ADV): Select this to shoot in 24P advanced |
| mode (24 frames/second). The tape is recorded |
| using advanced conversion. |
|
|
NAME EDIT | Edits the name of the selected scene |
(camera) | file you have selected with the scene |
| file dial. |
|
|
SAVE/INIT | SAVE: |
(camera) | The changed settings in the scene file |
| are saved. |
| • The original scene file settings will be |
| restored when the menu mode is |
| released, the operation is switched to |
| the VCR mode or when the power is |
| turned off if you do not select SAVE. |
| INITIAL: |
| The selected scene file settings in the |
| SCENE FILE dial are returned to the |
| factory settings. |
|
|
are the factory settings.
70