Panasonic DX-2000 Print reduction modes, Program keys, Protocol, Relay address, Relay network

Glossary

Print reduction modes	The methods used to determine how an incoming document will be
	reduced to print onto the paper loaded in your machine.
Program keys	Keys that are defined for storing a sequence of stations to be dialed.
Protocol	A protocol is the special set of rules for communicating that the end points
	in a telecommunication connection use when they send signals back and
	forth. Both end points must recognize and observe the protocol.
PSTN	Public Switched Telephone Network. Network of interconnected switching
	equipment and transmission facilities.
Relay address	A 2-digit code that identifies your machine is programmed in a relay
	network.
Relay network	A group of facsimile machines that communicate via a relay station.
Relay station	A certain type of facsimile machine that can store and forward documents
	to an end receiving station and/or a relay station in another relay network.
	Your machine can not be used as a relay station.
Relayed Transmission	Sending a document to a relay station, which in turn, sends the document
	to the end receiving station.

Relayed Transmission Report A report that contains information regarding the last document

transmission to a relay station.

RESOLUTION	Relates to the number of dots scanned or printed per certain square. The
	quality of the image increases as the number of dots per certain square
	increases.
Router	A special purpose computer (or software package) that handles the
	connection between 2 or more networks. Routers act like traffic cops, they
	spend their time looking at the destination addresses of the packets
	passing through them and deciding which route to send them on.
Sender Selection	The user can select one of 24 pre-programmed sender’s name and email
	address/telephone number before each transmission.
Server	A computer, or a software package, that provides a specific kind of service
	to client software running on other computers. A single server machine
	could have several different server software packages running on it, thus
	providing many different servers to clients on the network.
Selective reception	A function that can be set so that your unit will receive from only those
	machines programmed into your dialler.
SMTP (Simple Mail Transfer	This is the main communication protocol used to send and receive email
Protocol)	on the Internet.
Station name	Alphanumeric ID which can be programmed for each One-Touch dialling
	and Abbreviated dialling number.
Stored documents	Documents that have been scanned and now are stored in your machine’s
	memory.
Sub-address	ITU-T recommendation for further routing, forwarding or relaying of
	incoming faxes.
Sub-address Password	ITU-T recommendation for additional security that corresponds to the Sub-
	address.
Subnet Mask	A mask bit used to manage sub-segments of the network which is defined
	with network IDs.

208