Panasonic DX-2000 manual Sending Documents via Internet Relay

Relayed Transmission

Sending Documents via Internet Relay

Once you have recorded all the necessary parameters in your machine, you can send a document to one or multiple G3 fax machines automatically through the Internet Relay Station by using the procedure described below. The Internet Relay Station must have all the necessary parameters setup.

To a Location That Has a Pre-programmed Relay Station

1

2

Set document(s) face down.

Enter only the telephone number(s) of the End Receiving Station(s) using any combination of the following methods:

•One-Touch Dialling

•Abbreviated Dialling

•Manual Number Dialling (up to 70 stations), press

SET after each station is entered. (see Note)

• Directory Search Dialling, press SET after each

station is entered (For details, see page 93 to 96.)

Ex: 02

ENTER STATION(S) THEN PRESS START 00%

<02> STOCKHOLM 4681111234

6

3

START

* STORE *	NO.002
PAGES=001	05%

The document(s) is stored into memory and your machine starts sending the document(s) to the Relay email address of the Relay Station with the telephone number for the End Receiving Station.

Ex: End Receiving Station	: 4681111234
	(Telephone number)
	[see Note 1]
Relay Station	: uk-rly@london.panasonic.co.uk

After the Relay Station completes its transmission to the End Receiving Station(s), your machine receives a COMM. Journal from the Relay Station. This Journal confirms whether the Internet Relayed Transmission was successful.

*STORE * COMPLETED TOTAL PAGES=005 25%

ON LINE *MEM.XMT* ID:uk-rly#4681111234

Note:

1. If the Relay Station requires a special access number to get an outside line, enter that access number first then press PAUSE to enter a pause (represented by a "-") before entering the full number.

161