Panasonic DX-2000 manual Fax Parameter Table, Parameter Setting Comments Number

Customizing Your Machine

Fax Parameter Table

No.	Parameter	Setting	Setting		Comments
		Number
001	CONTRAST	1	Normal	Setting the home position of the CONTRAST key.
		2	Lighter
		3	Darker
002	RESOLUTION	1	Standard	Setting the home position of the RESOLUTION key.
		2	Fine
		3	400 dpi
004	STAMP	1	Off	Setting the home position of the STAMP key.
				To select the stamp function when document is stored in memory,
		2	On
				see Fax Parameter No. 028.
005	MEMORY	1	Off	Setting the home position of the MEMORY key.
		2	On
006	DIALLING METHOD	1	Pulse	Selecting the dialling method.
		2	Tone
007	HEADER PRINT	1	Inside	Selecting the printing position of the header.
				Inside : Inside TX copy area.
		2	Outside
				Outside : Outside TX copy area.
				No print : Header is not printed.
		3	No print
008	HEADER FORMAT	1	Logo, ID No.	Selecting the header format.
		2	From To
009	RCV’D TIME PRINT	1	Invalid	Selecting whether the machine prints the received date & time,
				remote ID, percentage of reduction and page number on the
		2	Valid
				bottom of each received page.
010	KEY/BUZZER VOLUME	1	Off	Selecting the volume of the Key/Buzzer tone.
		2	Soft
		3	Loud
012	COMM. JOURNAL	1	Off	Selecting the home position of printout mode for COMM. Journal
				Off/Always/INC.
		2	Always	Off :	Does not print.
				Always :	Always prints.
		3	Inc. only	Inc. only : Prints only when communication has failed.
013	AUTO JOURNAL PRINT	1	Invalid	Selecting whether the machine prints the journal automatically
				after every 100 transactions.
		2	Valid
014	FILE ACCEPTANCE	1	Invalid	Selecting whether the machine prints the file acceptance journal.
	REPORT			If you set this parameter to valid, a journal will print after any
		2	Valid
				memory communication.
017	RECEIVE MODE	1	Manual	Setting the reception mode to automatic or manual.
		2	Auto

72