Personalising Your Phone
When a message has been received containing a logo:
1Z Q to acknowledge receipt of the logo
2Use e to select the logo location Z Q twice
The logo is now stored and can be selected as an idle screen option from the Personalise menu.
Setting the Backlight Time
1From Idle Z Q, select Personalise > Display Setting > Backlight Time Z Q
2Use e to cycle through the times available
3Z Q to select the desired time
Using Voice Commands
Before any of the phone’s voice activated functions can be used, it is necessary to configure the phone so that it will recognize a particular voice and intonation.
Voice Dial Entry Setup
This function allows the user to recall and dial numbers from the Phonebook using voice commands.
1From Idle Z Q, select Personalise > Voice Command > Voice Dial Z Q
2Z Q to add a new Voice Dial entry to the list
3Browse through the Phonebook to select an entry which is to be attributed with a voice command, Z Q twice
Note: Each recording is short in length, so be prepared to speak soon after initiating the recording.
4When ready, the user should hold the phone approximately 20cm
from his/her mouth, Z Q and speak clearly into the microphone to record the name of the selected Phonebook entry
When the recording has stopped, it will be necessary to repeat the name.
5 When prompted, Z Q and repeat the name
When recording is completed for a second time, the display will indicate if the recording was successful or not. If unsuccessful, repeat from step 4.
22
