Call Information

Call Charges

To maintain control over the cost of calls that are made, the phone can be set to restrict use to a finite number of units overall. (Q)

Setting the Unit Price

Firstly, a price per unit must be entered. This is the cost that the Service Provider charges for one unit of call time. (Q)

1From Idle Z Q, select Phone Menu > Call Service > Service Charges > Price/Unit Z Q

2Z Q to edit the values

At this point you will be asked to enter your PIN2 or Lock code Z Q.

3Enter a currency unit (up to three characters) e.g. GBP Z Q twice

4Enter a price Z Q twice

Setting the Maximum Unit Level

This function allows the user to pre - determine the maximum cost of calls made. (Q)

1From Idle Z Q, select Phone Menu > Call Service > Service Charges > Max Cost Z Q

2Z Q twice to edit the values

At this point you will be asked to enter your PIN2 or lock code Z Q.

3Enter a value (number of units) which is to be the maximum permitted, and the corresponding cost will be displayed

4Z Q twice to accept

Note: The duration of one unit may vary during the day, peak and off-peak times. Therefore, the call charge can be calculated accordingly. However, call charge information may not give an accurate reflection of the tariffs charged by your Service Provider.

Setting a Warning Level

A warning can be set as an indication that the maximum cost is about to be reached. This function is SIM dependent.

1From Idle Z Q, select Phone Menu > Call Service > Service Charges > Warning at Z Q

2Z Q twice to edit the value

40

Page 50
Image 50
Panasonic EB-GD76 Call Charges, Setting the Unit Price, Setting the Maximum Unit Level, Setting a Warning Level