Basic Operation

Earpiece Volume Control

The volume level may be adjusted during a call:

Use a to decrease the volume, use b to increase the volume

Note: Volume control for Personal Handsfree accessory is adjusted in the same manner.

Locking the Phone

With the Phone Lock enabled you will be restricted to answer incoming calls and make emergency calls only. The Phone Lock Code is factory set to “0000”.

1 From Idle Z Q, select Phone Menu > Security > Phone Lock Z Q

2Select Enable Z Q

3Enter the 4-digit code, Z Q

The phone will be locked and the lock icon (O) will be displayed.

Unlocking the Phone

To restore normal operation, enter your Lock Code Z Q. The lock icon will be removed from the display. However, once you turn the phone off and on again the Lock Code will need to be re-entered. When the correct code has been entered Z Q.

Disabling Phone Lock

The phone must be unlocked before the phone lock can be disabled.

1From Idle Z Q, select Phone Menu > Security > Phone Lock Z Q

2Select Disable Z Q

3Enter the 4-digit code Z Q

Using the PIN

The PIN (Personal Identification Number) protects your SIM against unauthorized use. If you enable the PIN, every time the phone is turned on you will be prompted to enter the PIN.

The PIN2 controls security for the Fixed Dial Store, Call Charge metering and Barred Dial.

10

Page 20
Image 20
Panasonic EB-GD76 Earpiece Volume Control, Locking the Phone, Using the PIN, Unlocking the Phone, Disabling Phone Lock