Panasonic FP-X Series manual  FP0 expansion units,  FP0 intelligent units,  FP0 link units

FP-X series

Product number list

FP0 expansion units

Product name				Specifications			Product number
	Number of I/O points		Power supply	Input	Output	Connection type
			voltage
	8	Input: 8		24VDC Sink/Source (±common)		MIL connector	FP0-E8X
	8	Input: 4	24VDC	24VDC Sink/Source (±common)	Relay output: 2A	Terminal block	FP0-E8RS
		Output: 4
FP0 E8 Expansion Unit	8	Output: 8	24VDC		Relay output: 2A	Terminal block	FP0-E8YRS
	8	Output: 8			Transistor output:	MIL connector	FP0-E8YT
					NPN 0.1A
	8	Output: 8			Transistor output:	MIL connector	FP0-E8YP
					PNP 0.1A
	16	Input: 16		24VDC Sink/Source (±common)		MIL connector	FP0-E16X
	16	Input: 8	24VDC	24VDC Sink/Source (±common)	Relay output: 2A	Terminal block
		Output: 8					FP0-E16RS
	16	Input: 8		24VDC Sink/Source (±common)	Transistor output:	MIL connector	FP0-E16T
		Output: 8			NPN 0.1A
FP0 E16 Expansion Unit
	16	Input: 8		24VDC Sink/Source (±common)	Transistor output:	MIL connector	FP0-E16P
		Output: 8			PNP 0.1A
	16	Output: 16			Transistor output:	MIL connector	FP0-E16YT
					NPN 0.1A
	16	Output: 16			Transistor output:	MIL connector	FP0-E16YP
					PNP 0.1A
	32	Input: 16			Transistor output:	MIL connector	FP0-E32T
		Output: 16		24VDC Sink/Source (±common)	NPN 0.1A
FP0 E32 Expansion Unit	32	Input: 16		24VDC Sink/Source (±common)	Transistor output:	MIL connector	FP0-E32P
		Output: 16			PNP 0.1A
	32	Input: 16	24VDC	24VDC Sink/Source (±common)	Relay output: 2A	Terminal block	FP0-E32RS
		Output: 16

Notes: 1) The relay output type expansion units come with a power cable (part number AFP0581). (The transistor output type needs no power cable.)

2)The terminal block type relay output units have 2 terminal blocks (9 pins) made by Phoenix. Use a 2.5mm wide screwdriver.

3)The transistor output units have a press-fit socket for wire-pressed terminal c able and contacts. Use the press-fit tool (part number AXY52000) for wire-pressed terminal cable.

FP0 intelligent units

Product name			Specifications	Product number
FP0 Thermocouple unit	4 channels, K, J, T, R thermocouple, Resolution: 0.1°C			FP0-TC4
	8 channels, K, J, T, R thermocouple, Resolution: 0.1°C			FP0-TC8
	<Input specifications>	Number of channels:	2 channels
		Input range:	0 to 5V, –10 to +10V (Resolution: 1/4000)
FP0 Analog I/O unit			0 to 20mA (Resolution: 1/4000)	FP0－A21
	<Output specifications>	Number of channels:	1 channel
		Output range:	–10 to +10V (Resolution: 1/4000)
			0 to 20mA (Resolution: 1/4000)
FP0 A/D Converter Unit	<Input specifications>	Number of channels:	8 channels	FP0-A80
		Input range:	0 to 5, –10 to +10V (Resolution: 1/4000)
			0 to 20mA (Resolution: 1/4000)
	<Output specifications>	Number of channels:	4 channels	FP0-A04V
FP0 D/A Converter Unit		Output range:	–10 to +10V (Resolution: 1/4000)
				FP0-A04I
			4 to 20mA (Resolution: 1/4000)
FP0 RTD Unit	6 channels, Pt100, Pt1000, Ni1000, Resolution: 0.1K			FP0-RTD6

FP0 link units

Product name	Specifications	Power supply	Product number
		voltage
	This unit is for making the FP0 function as a slave station of the CC-Link.
FP0 CC-Link Slave unit*	Only one unit can be connected to the furthest right edge of the FP0 expansion bus.	24VDC	FP0-CCLS
FP0 I/O Link unit	This is a link unit designed to make the FP0 function as a station to MEWNET-F (remote I/O system).	24VDC	FP0-IOL
FP0 PROFIBUS Unit	PROFIBUS DP slave or remote I/O unit	24VDC	FP0-DPS2
FP Web-Server Unit	Connect all FP-Series PLCs to the Ethernet	24VDC	FPWEB2

*Note: Accuracy will change if an FP0 thermocouple unit is used at the same time. For details, please refer to the CC-Link Unit manual.

01/2008

18