Panasonic T32CT, FP0T32CP, FP0-C16T, E32RS, E32T, E32P, FP0-C10RS, E16T, E16P, E16RS, C32CT FP0 Func tions

FP0 – Impressive Capabilities

FP0 Func tions

Equipped with 2-axis independent positioning and high-speed counter for support of PWM output.

Pulse output function

The unit comes equipped with 2 channels for the output of up to 10kHz pulses (5kHz during 2-channel output). Since these two channels can be separately controlled, the PLC is also suitable for independent 2- axis positioning. Setting automatic trapezoid control, automatic return to home position and JOG operation are made very easy by using instructions specially designed for such operations.

(For transistor output type only.)

Y0	Pulse output	Motor	Stepping motor
	Clockwise output/
Y2	counter-clockwise output	driver 1	Servo motor
Y1	Pulse output	Motor	Stepping motor
	Clockwise output/
	counter-clockwise output	driver 2
Y3			Servo motor

Positioning control is a breeze with the auto trapezoid control command!

High-speed counter function

The high-speed counter is designed to use 4 channels in single-phase operation or

2 channels in 2-phase operation. In single phase operation, the total speed for all 4 channels is 10kHz, in 2-phase operation the 2-channel total is 2kHz total speed, making the unit suitable for conveyer control, inverter control and so forth using an encoder.

	Feeder roller	Cutter
		Lead wiring,
	Inverter	tape
Motor
	START/STOP
Encoder	signal	Cutter blade
Encoder output		control signal
inputted into
high-speed counter

PWM output function

Its PWM (Pulse Width Modulation) output function makes it possible to provide temperature control with a single compact FP0 unit. (For transistor output type only.)

# When pulse width values are increased… # When reduced…

	Heater	Heater
# When reduced…	power up	power down

Serial communication function

• The FP0’s second RS232C port (types C10CRS, C14CRS, C16C, C32C, and T32C) allows direct connection to computers and operation display panels. Also, bi-directional data communication with barcode readers and other RS232C devices is made easy.

• Both the relay type and transistor output type control units can be optionally equipped with a 2nd RS232C port.

FP0

#For connecting to computers and operation display panels

Host computer	Operation
(Personal computer)	display panel

#For data communication with RS232C devices

Imagechecker Bar code reader Serial printer

Analogue control function

Analogue control is made simple with four types of analoque modules featuring different numbers of input and output channels.

Also, despite its small size, the I/O resolution is a high 1/4000 (12 bits). Support various I/O ranges by setting the DIP switches on the analogue I/O unit for simple operation.

0RESSURE SENSOR

,ASER ANALOGUE SENSOR

25.

02/'

%22/2

!,!2- 25.

02/'

-/$%











/&&& &/.

66

)) ).

))

6 /54 )

#/-

* ʇÊ
Ó£

)NVERTER

0OTENTIOMETER

07/2007 7