to avoid scratches and peeling of this coating, an approved soft cloth has been included to wipe the LCD surface of this computer. Before using this computer, be sure to read the instructions provided below.
•Be sure to wipe the LCD display to remove fingerprints, etc., with the soft cloth.
•Do not wipe areas other than the LCD display with the soft cloth.
How to use the soft cloth
•Use the soft cloth when it is dry. Do not apply water or solvents to the soft cloth.
•First, lightly wipe foreign particles and dust adhering to the LCD display on one side of the soft cloth. Do not use force, since the LCD surface may be damaged with the foreign particles or dust.
Next, wipe off fingerprint, etc., with the other side of the soft cloth.
After wiping off foreign particles and dust, wash the soft cloth (refer to the following) to remove the
foreign particles and dust from the soft cloth.
Clean the screen while the computer is powered off.
Cleaning the screen while the power is on may cause the computer to malfunction. Also, dirt on the screen is easier to see when the computer is powered off, and so is easier to clean.
Wash the soft cloth when it becomes dirty. When the soft cloth becomes dirty, wash it with mild detergent. Do not use bleach or fabric conditioner (softener), or try to sterilize the cloth by boiling.
If the soft cloth is dirty, it may be ineffective in cleaning the screen, and in fact may cause dirt to adhere to the screen.
Check the following to prevent the surface of the screen from being scratched.
•Are you using your finger or a digitizer pen to operate the screen?
•Is the surface clean?
•Is the soft cloth clean?
•Are you using the digitizer pen with the tip extended?
•Is the tip of the digitizer pen clean?
•Is you finger clean?
To Clean Areas Other Than the LCD Panel
Wipe with a soft dry cloth such as gauze. When using detergent, dip a soft cloth in
CAUTION
Do not use benzene, thinner, or rubbing alcohol since it may adversely affect the surface causing discoloration, etc. Do not use commercially- available household cleaners and cosmetics, as they may contain components harmful to the surface.
Do not apply water or detergent directly to the computer, since liquid may enter inside of the computer and cause malfunction or damage.
Dispose of Computer
Remove the microSD memory card and other peripherals.
Perform “Factory data reset” to erase the stored data. ( page 25)
After the remaining battery charge become 0 %, remove the battery by performing the following steps, and dispose or recycle the battery in accordance with national legislation.
DANGER
Generation of heat, ignition or rupture of the battery may result.
Handling This Computer
Do Not Disassemble the Computer Except When Disposing of It
Handling The Battery
Do Not Charge
Do Not Use With Any Other Product
Do Not Throw the Battery Into a Fire or Expose It to Excessive Heat
Avoid Extreme Heat (Near the Fire, In Direct Sunlight, for Example)
Do Not Short the Positive (+) and Negative
Do Not Insert Sharp Objects Into the Battery, Disassemble, or Modify It
Do Not Apply Shocks to the Computer by Dropping It, Applying Strong Pressure to It, etc.
Useful Information
21
