Receiving Faxes
TEL mode!
(answering all calls manually)
Activating the TEL mode
If the arrow (▼) is shown on the right of the display, turn it off by pressing AUTO ANSWER .
Display: TEL MODE
ON
Receiving a fax manually
1 When the unit rings, lift the handset to answer the call.
2 When:
—document reception is required,
—a fax calling tone (slow beep) is heard, or
—no sound is heard,
press FAX START .
CONNECTING.....
3 Replace the handset.
●The unit will start reception.
Note:
●If you do not answer the call within 15 rings, the unit will temporarily switch to the fax and the caller can send a document.
●Up to 30 sheets of printed paper can be held. Remove the printed paper before it exceeds 30 sheets.
Handset
Display
AUTO ANSWER | STOP |
| |
FAX START | |
To stop receiving
Press STOP .
Friendly reception feature
When you answer a call and hear a fax calling tone (slow beep), the unit will automatically start reception.
●If this is not required, set feature #46 to “OFF” (p. 52).
Fax reception in memory
When a printing problem is detected, the unit will temporarily store the received document into memory.
While the document is in memory;
—the display will show an error message and the following message alternately.
Display: FAX IN MEMORY
— slow beeps will sound (memory reception alert). See feature #44 on page 52.
●Follow the instructions on pages 55 and 56 to solve the problem.
●For memory capacity, see page 73.
38