Ink Film
4 Remove the stoppers and tags from the new ink film. Find the “T” shaped gear (blue).
Insert the blue core of the front ink film roll | |
5 into the right slot of the unit ( 1 | ). Insert the |
“T” shaped gear (blue) into the left slot of the | |
unit ( 2 ). |
|
Insert the back ink film roll ( 3 | ). |
If the ink film is slack, tighten it by winding | |
6 the gear. |
|
Incorrect | Correct |
Tight
7 Close the back cover securely by pushing down on the dotted area at both ends ( 1 ). Close the front cover securely ( 2 ).
●The following message will be displayed while the unit is checking that there is no slack on the ink film.
Display: PLEASE WAIT
Stopper
New ink film “T” shaped gear (blue)
“T” shaped gear (blue)
2 
Left slot
Front ink film roll
Ink film
1
2
Tags
Stopper
Back ink film roll
3Right
slot
1
Blue core
Gear
Dotted area
Front cover
Back cover
Note:
●The ink film is completely safe to touch, and will not rub off on your hands like carbon paper.
Display
For fax advantage assistance, call | 65 |