Receiving Faxes
FAX ONLY mode!
(all calls are received as faxes)
Activating the FAX ONLY mode
If the arrow (▼) is not shown on the right of the display, turn it on by pressing AUTO ANSWER .
●The display will show the current number of rings in the FAX ONLY mode.
Display: PICKUP & RCV FAX
AFTER 3 RINGS 
●If you wish to change the number of rings, rotate JOG DIAL until the desired ring count is
displayed and press SET .
▼
ON
Display
JOG DIAL
● The unit will automatically answer all calls and | SET | |
AUTO ANSWER | ||
only receive fax documents. |
Note:
●If the arrow is already shown on the right of the display and you wish to change the ring count, turn the
arrow off once then on again by pressing AUTO ANSWER and follow the instructions above.
●This mode should not be used with a telephone line which is used for both voice and fax calls. Fax communication will be attempted even if someone is trying to call you.
If you have a telephone line just for faxes, we recommend the following setup.
Example: One telephone line is used for voice calls and a separate telephone line for faxes.
Line 1 – Voice calls
Line 2 – Fax calls
Only a fax machine is connected.
39