Panasonic KX-FT34HK, KX-FT33HK quick start Changing the fax activation code

Receiving Faxes

Changing the fax activation code

The fax activation code is used in the following cases;

—when receiving faxes using an extension telephone (see page 50).

—when receiving a voice message and fax document in one call (see page 47).

Important:

●This code should be different from the remote activation ID (see page 47).

1	Press	MENU .
		Display:		1.SYSTEM SET UP
2	Press	, then 4	1 .
				FAX ACTIVATION
3
	Press START/COPY/SET .
				MODE=ON	▼▲
4
	Press	or	to select the desired setting.
	● If this feature is not required, select “OFF”.
5	Press START/COPY/SET .
				CODE=	9

●The display will show the pre-selected code.

6	Enter the new code number.
	● This code can be from 2 to 4 digits in length
7	using 0 - 9 and	.
	Press START/COPY/SET .
			SETUP ITEM [ ]
8
	Press MENU .

Note:

●If you subscribe to some special telephone company services, all or part of the fax activation code must be different from the service access code.

●The fax activation code should not be set to “0000”.

Dial keypad MENU

1 2 3

4 5 6

7 8 9

0

START/COPY/SET

Fax/Copy

– 51 –