6. Fax (KX-MB3020 only)
45
6.4.2 Adding a new item into the broadcast
memory
1{Directory}
2Press {V} or {^} repeatedly to display the desired
broadcast memory location (<BROADCAST1>,
<BROADCAST2> or <MANUAL BROAD>). i
{Menu} i {*}
3Press {V} or {^} repeatedly to display the item you
want to add. i {Set}
LTo add other items, repeat this step (up to 20
items).
4{Stop}
Note:
LWhen adding new items to the MANUAL
BROADCAST memory, you can only select stored
items.
6.4.3 Erasing a stored item from the
broadcast memory
1{Directory}
2Press {V} or {^} repeatedly to display the desired
broadcast memory location (<BROADCAST1>,
<BROADCAST2> or <MANUAL BROAD>). i
{Menu} i {#}
3Press {V} or {^} repeatedly to display the item you
want to erase.
LTo cancel erasing, press {Stop}.
4{Set} i {Set} i {Stop}
6.4.4 Sending the same document to pre-
programmed parties
To send the same document using the scanner glass
1. Set the original (page 17).
2. If necessary, change the resolution (page 41) and
the contrast (page 41).
3. Press {Broadcast} (1–2) or {Manual Broad}.
LTo send a single page, go to step 5.
LTo send multiple pages, go to the next step.
4. Place the next page. i {Set}
LTo send more pages, repeat this step.
5. {Start}
Note:
LTo stop sending, see page 73.
LIf you select FINE, SUPER FINE or PHOTO
resolution, the number of pages that the unit can
send will decrease.
LIf the document exceeds the memory capacity,
sending will be canceled.
LIf a party is busy or does not answer, it will be skipped
and redialed later 1 time.
LAfter transmission, the unit will automatically print a
report (broadcast sending report).
To send the same document using the automatic
document feeder
1. Set the original (page 18).
2. If necessary, change the resolution (page 41) and
the contrast (page 41).
3. Press {Broadcast} (1–2) or {Manual Broad}.