12. Paper Jams
94
3Close the cover at the left side of the lower input tray. 12.1.3 When the recording paper is not fed
into the unit properly
The display will show the following.
CHECK PICK UP INPUT TRAY #1 (standard
input tray)
CHECK PICK UP INPUT TRAY #2 (lower input
tray)
1Pull the paper input tray until it clicks into place, then
pull it completely out, lifting the front part of the tray.
Remove the recording paper and straighten.
2Re-load the recording paper.
3Insert the paper input tray into the unit, lifting the
front part of the tray. Then push it completely into the
unit.
Note:
LIf the error message is still displayed, check the
recording paper specifications and load the
recording paper again. See page 13 and page 74 for
details.