2. Preparation
21
2.4 Selecting the operation mode (Scan/Copy/Fax)
You can select the desired mode by pressing one of the
following buttons.
{Scan}: Select this mode when using the unit as a
scanner (page 33).
{Copy}: Select this mode when using the unit as a
copier (page 37).
{Fax}: Select this mode when using the unit as a fax
machine (page 44).
Note:
LThe default operation mode is the copy mode.
LYou can change the default operation mode (feature
#463 on page 66) and the timer before returning to
the default operation mode (feature #464 on page
66).
Document Requirements
2.5 Setting the original

2.5.1 Using the scanner glass

1Open the document cover (1).
2Place the document FACE DOWN on the scanner
glass (2), aligning the top left of the document with
the corner where the m mark is positioned.
3Close the document cover.
Note:
LConfirm that there are no documents in the
automatic document feeder.
LPlace the original onto the scanner glass gently. To
avoid malfunction, do not press down too firmly.
LIf the original is a thick book, do not close the
document cover.
LConfirm that any ink, paste or correction fluid has
dried completely.
LEffective scanning area is shown by the shaded
area:
Effective scanning area
2
1

208 mm

348

mm

4 mm 4 mm

4 mm

4 mm