6. Fax
45
sure that feature #401 is activated (page 67). For an
explanation of the messages, see page 87.
Printing a journal report
A journal report provides you with a printed record of the
30 most recent faxes. To print it manually, see page 109.
To print it automatically after every 30 new fax
transmissions and receptions, make sure feature #402 is
activated (page 67). For an explanation of the
messages, see page 87.
6.1.2 Using the automatic document feeder1If the {Fax} light is OFF, turn it ON by pressing
{Fax}.
2Set the original (page 22).
3If necessary, change the resolution and contrast
according to the type of document.
LTo select the resolution, see page 44.
LTo select the contrast, see page 44.
4{Monitor}
5Dial the fax number. i {Start}
Note:
LTo stop sending, see page 85.
LDo not open the document cover when sending a fax
with the automatic document feeder.
Pre-dialling a fax number
1. Enter the fax number.
2. Set the original (page 22). i {Start}
Sending from memory (Quick scan feature)
1. Set the original (page 22).
2. Enter the fax number.
3. Press {V} or {^} repeatedly to select “Quick
Scan”, then press {<} or {>} repeatedly to select
“On”. i {Start}
To send 2-sided originals
1. Set the original (page 22).
2. {Duplex}
3. Press {V} or {^} repeatedly to select the desired
binding of the original.
–“Long Edge”
–“Short Edge”
4. {Set}
5. Dial the fax number. i {Start}